OPA132U vs OPA137U Comparação
Comparação detalhada lado a lado de OPA132U por Texas Instruments e OPA137U por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
OPA132U - 8MHz FET-Input Op Amp, Single, 8-SOIC | Texas Instruments
OPA132U ✓ AtivoComparação de especificações
| Parâmetro | OPA132U | OPA137U |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Unknown |
| Amplifier Type | FET-Input Operational Amplifier | Single voltage-feedback operational amplifier |
| Number of Channels | 1 (Single) | — |
| Gain Bandwidth Product | 8 MHz | — |
| Slew Rate | 20 V/µs | 3.5 V/µs |
| Input Bias Current (max) | 50 pA | — |
| Input Offset Voltage (max) | 500 µV | — |
| Open-Loop Gain (600 Ω load) | 130 dB | — |
| Total Harmonic Distortion | 0.00008 % | — |
| Supply Voltage Range (Dual) | ±2.25 V to ±18 V | — |
| Supply Voltage Range (Single) | 4.5 V to 36 V | — |
| Faixa de temperatura de operação | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Tipo de saída | Rail-to-Rail (approaching rails on 600 Ω) | — |
| Encapsulamento | 8-pin SOIC (D) | 8-pin SOIC |
| Tipo de montagem | Surface Mount | Surface mount |
| Nível MSL | 3 (168 hours) | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Series | SoundPlus, OPAx132 | — |
| Input Architecture | — | JFET input |
| Maximum Supply Voltage | — | 36 V |
| Gain-Bandwidth Product | — | 1 MHz |
| Input Bias Current | — | ±10 pA |
| Corrente de repouso | — | 120 µA per channel |
| Open-Loop Gain | — | 145 dB |
| Input Common-Mode Range | — | Rail-to-rail input to V+ |
| Channel Count | — | 1 channel |
| Supply Voltage Range | — | [DATA_NEEDED: minimum and maximum operating supply voltage] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Input Voltage Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Output Swing | — | [DATA_NEEDED: output voltage swing] |
| Short-Circuit Current | — | [DATA_NEEDED: output short-circuit current] |