OPA132U vs OPA2132U Comparaison
Comparaison détaillée côte à côte de OPA132U par Texas Instruments et OPA2132U par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
OPA132U - 8MHz FET-Input Op Amp, Single, 8-SOIC | Texas Instruments
OPA132U ✓ ActifComparaison des spécifications
| Paramètre | OPA132U | OPA2132U |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Amplifier Type | FET-Input Operational Amplifier | Dual operational amplifier |
| Number of Channels | 1 (Single) | — |
| Gain Bandwidth Product | 8 MHz | — |
| Slew Rate | 20 V/µs | 20 V/µs |
| Input Bias Current (max) | 50 pA | — |
| Input Offset Voltage (max) | 500 µV | — |
| Open-Loop Gain (600 Ω load) | 130 dB | — |
| Total Harmonic Distortion | 0.00008 % | — |
| Supply Voltage Range (Dual) | ±2.25 V to ±18 V | — |
| Supply Voltage Range (Single) | 4.5 V to 36 V | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Type de sortie | Rail-to-Rail (approaching rails on 600 Ω) | — |
| Boîtier | 8-pin SOIC (D) | 8-pin SOIC |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | 3 (168 hours) | — |
| Statut RoHS | Compliant | — |
| Series | SoundPlus, OPAx132 | — |
| Input Stage | — | FET input |
| Number of Amplifiers | — | 2 circuits |
| Gain-Bandwidth Product | — | 8 MHz |
| Maximum Input Bias Current | — | 5 pA |
| Total Harmonic Distortion Plus Noise | — | 0.00008% |
| Open-Loop Gain | — | 130 dB at a 600 Ω load |
| Supply Voltage Range | — | ±18 V |
| Maximum Offset Voltage | — | 500 µV |
| Application Category | — | General-purpose, audio, data-acquisition, and communications |
| Courant d'alimentation | — | [DATA_NEEDED: typical supply current] |
| Input Voltage Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |