OPA132U vs OPA2132U 비교
다음의 상세 나란히 비교: OPA132U 제조: Texas Instruments 및 OPA2132U 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | OPA132U | OPA2132U |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | FET-Input Operational Amplifier | Dual operational amplifier |
| Number of Channels | 1 (Single) | — |
| Gain Bandwidth Product | 8 MHz | — |
| Slew Rate | 20 V/µs | 20 V/µs |
| Input Bias Current (max) | 50 pA | — |
| Input Offset Voltage (max) | 500 µV | — |
| Open-Loop Gain (600 Ω load) | 130 dB | — |
| Total Harmonic Distortion | 0.00008 % | — |
| Supply Voltage Range (Dual) | ±2.25 V to ±18 V | — |
| Supply Voltage Range (Single) | 4.5 V to 36 V | — |
| 동작 온도 범위 | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| 출력 유형 | Rail-to-Rail (approaching rails on 600 Ω) | — |
| 패키지 | 8-pin SOIC (D) | 8-pin SOIC |
| 실장 유형 | Surface Mount | Surface mount |
| MSL 레벨 | 3 (168 hours) | — |
| RoHS 상태 | Compliant | — |
| Series | SoundPlus, OPAx132 | — |
| Input Stage | — | FET input |
| Number of Amplifiers | — | 2 circuits |
| Gain-Bandwidth Product | — | 8 MHz |
| Maximum Input Bias Current | — | 5 pA |
| Total Harmonic Distortion Plus Noise | — | 0.00008% |
| Open-Loop Gain | — | 130 dB at a 600 Ω load |
| Supply Voltage Range | — | ±18 V |
| Maximum Offset Voltage | — | 500 µV |
| Application Category | — | General-purpose, audio, data-acquisition, and communications |
| 공급 전류 | — | [DATA_NEEDED: typical supply current] |
| Input Voltage Noise Density | — | [DATA_NEEDED: input voltage noise density] |
| Common-Mode Rejection Ratio | — | [DATA_NEEDED: common-mode rejection ratio] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |