PCA9535DB vs PCA9535DBR Comparaison
Comparaison détaillée côte à côte de PCA9535DB par Texas Instruments et PCA9535DBR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | PCA9535DB | PCA9535DBR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Fin de vie |
| Device Type | Remote 16-bit I2C/SMBus low-power I/O expander | — |
| Number of I/O | 16 | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| I2C/SMBus Clock Frequency | 400 kHz | — |
| Interface | I2C/SMBus | I2C and SMBus |
| Interrupt Output | Yes | Yes |
| Configuration Registers | Yes | Yes |
| I/O Direction Control | Programmable input/output | — |
| Standby Current Consumption | 1 uA maximum | — |
| Boîtier | 24-SSOP (0.209, 5.30 mm width) | 24-SSOP (0.209 inch, 5.30 mm width) |
| Packaging | Tube | Cut Tape |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| I/O Voltage Levels | [DATA_NEEDED: I/O voltage levels] | — |
| I/O Output Current | [DATA_NEEDED: output current] | — |
| Input Hysteresis | [DATA_NEEDED: input hysteresis] | — |
| Power-On Reset | [DATA_NEEDED: power-on reset behavior] | — |
| I2C Address | [DATA_NEEDED: programmable I2C address range] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of I/O Lines | — | 16 lines |
| Maximum Bus Clock Frequency | — | 400 kHz |
| Maximum Standby Current | — | 1 uA |
| Type de montage | — | Surface mount |
| I/O Port Organization | — | Two 8-bit ports, 16 I/O total |
| Low-Power Operation | — | Low standby-current operation |
| Host GPIO Reduction | — | 16 host I/O lines |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Output Current per Line | — | [DATA_NEEDED: output current per line] |
| Input and Output Port Current | — | [DATA_NEEDED: input and output port current] |
| I2C Address Configuration | — | [DATA_NEEDED: I2C address configuration details] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |