PCA9535DB vs PCA9535DBR Perbandingan
Perbandingan bersamaan detil PCA9535DB dari Texas Instruments dan PCA9535DBR dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | PCA9535DB | PCA9535DBR |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Akhir Hidup |
| Device Type | Remote 16-bit I2C/SMBus low-power I/O expander | — |
| Number of I/O | 16 | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| I2C/SMBus Clock Frequency | 400 kHz | — |
| Antarmuka | I2C/SMBus | I2C and SMBus |
| Interrupt Output | Yes | Yes |
| Configuration Registers | Yes | Yes |
| I/O Direction Control | Programmable input/output | — |
| Standby Current Consumption | 1 uA maximum | — |
| Paket | 24-SSOP (0.209, 5.30 mm width) | 24-SSOP (0.209 inch, 5.30 mm width) |
| Packaging | Tube | Cut Tape |
| Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| I/O Voltage Levels | [DATA_NEEDED: I/O voltage levels] | — |
| I/O Output Current | [DATA_NEEDED: output current] | — |
| Input Hysteresis | [DATA_NEEDED: input hysteresis] | — |
| Power-On Reset | [DATA_NEEDED: power-on reset behavior] | — |
| I2C Address | [DATA_NEEDED: programmable I2C address range] | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of I/O Lines | — | 16 lines |
| Maximum Bus Clock Frequency | — | 400 kHz |
| Maximum Standby Current | — | 1 uA |
| Tipe Mounting | — | Surface mount |
| I/O Port Organization | — | Two 8-bit ports, 16 I/O total |
| Low-Power Operation | — | Low standby-current operation |
| Host GPIO Reduction | — | 16 host I/O lines |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |
| Output Current per Line | — | [DATA_NEEDED: output current per line] |
| Input and Output Port Current | — | [DATA_NEEDED: input and output port current] |
| I2C Address Configuration | — | [DATA_NEEDED: I2C address configuration details] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |