PCM1794DB-BB vs PCM1794DB Comparaison
Comparaison détaillée côte à côte de PCM1794DB-BB par Texas Instruments et PCM1794DB par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | PCM1794DB-BB | PCM1794DB |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Unknown |
| Converter Type | Stereo digital-to-analog converter | Stereo audio digital-to-analog converter |
| Résolution | 24 bit | — |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Signal-to-Noise Ratio | 132 dB | — |
| Channel Configuration | 2-channel stereo | — |
| Supported Digital Audio Formats | I2S, PCM, and left-justified | — |
| DAC Architecture | Advanced segment DAC | Advanced segment DAC |
| Type de sortie | Balanced current output | — |
| Control Method | Hardware control | — |
| Process Technology | CMOS | CMOS |
| Boîtier | 28-lead SSOP | 28-lead SSOP |
| Logic Supply Voltage | 3 V to 3.6 V | — |
| Analog Supply Voltage | 4.75 V to 5.25 V | — |
| Modulator Order | Third-order delta-sigma | — |
| Mismatch Reduction | Data-weighted averaging | — |
| Type de montage | Surface mount | — |
| Statut RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Data Resolution | — | 24 bit |
| Configuration de sortie | — | Balanced current outputs |
| Digital Audio Interface | — | I2S, PCM, and left-justified |
| Digital Input Tolerance | — | 5 V tolerant |
| Supply Condition for Electrical Characteristics | — | VCC1 = VCC2L = VCC2R = 5 V, VDD = 3.3 V |
| Reference Test Condition | — | TA = 25 degrees C |
| Reference System Clock | — | 256 fS |
| Reference Sampling Rate | — | 44.1 kHz |
| Initialization Requirement | — | 1024 system clock periods after reset |
| Dynamic Range | — | 9 V rms mono; 4.5 V rms stereo; 2 V rms stereo |
| THD+N | — | 0.0004% typical |
| Clock Jitter Tolerance | — | Improved tolerance; exact value not stated |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |