PCM1794DB-BB vs PCM1794DB Perbandingan
Perbandingan bersamaan detil PCM1794DB-BB dari Texas Instruments dan PCM1794DB dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Perbandingan Spesifikasi
| Parameter Umum | PCM1794DB-BB | PCM1794DB |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Aktif | Unknown |
| Converter Type | Stereo digital-to-analog converter | Stereo audio digital-to-analog converter |
| Resolusi | 24 bit | — |
| Maximum Sampling Rate | 192 kHz | 192 kHz |
| Signal-to-Noise Ratio | 132 dB | — |
| Channel Configuration | 2-channel stereo | — |
| Supported Digital Audio Formats | I2S, PCM, and left-justified | — |
| DAC Architecture | Advanced segment DAC | Advanced segment DAC |
| Tipe Output | Balanced current output | — |
| Control Method | Hardware control | — |
| Process Technology | CMOS | CMOS |
| Paket | 28-lead SSOP | 28-lead SSOP |
| Logic Supply Voltage | 3 V to 3.6 V | — |
| Analog Supply Voltage | 4.75 V to 5.25 V | — |
| Modulator Order | Third-order delta-sigma | — |
| Mismatch Reduction | Data-weighted averaging | — |
| Tipe Mounting | Surface mount | — |
| Status RoHS | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | not_applicable | — |
| Data Resolution | — | 24 bit |
| Konfigurasi Output | — | Balanced current outputs |
| Digital Audio Interface | — | I2S, PCM, and left-justified |
| Digital Input Tolerance | — | 5 V tolerant |
| Supply Condition for Electrical Characteristics | — | VCC1 = VCC2L = VCC2R = 5 V, VDD = 3.3 V |
| Reference Test Condition | — | TA = 25 degrees C |
| Reference System Clock | — | 256 fS |
| Reference Sampling Rate | — | 44.1 kHz |
| Initialization Requirement | — | 1024 system clock periods after reset |
| Dynamic Range | — | 9 V rms mono; 4.5 V rms stereo; 2 V rms stereo |
| THD+N | — | 0.0004% typical |
| Clock Jitter Tolerance | — | Improved tolerance; exact value not stated |
| Rentang Suhu Kerja | — | [DATA_NEEDED: operating temperature range] |