PN7161A1HN vs PN7160A1HN Comparaison
Comparaison détaillée côte à côte de PN7161A1HN par NXP Semiconductors et PN7160A1HN par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | PN7161A1HN | PN7160A1HN |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | RF Modules | RF Modules |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,72 | $2,15 |
| Fonction | NFC Controller with NCI interface | — |
| RF Frequency | 13.56 MHz | — |
| Supported Protocols | ISO 14443 A/B, ISO 15693, FeliCa, MIFARE Classic, MIFARE DESFire, NTAG, NFC Forum Type 1-5 | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | NCI 1.0 over I2C | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Operating Voltage (VCC) | 1.65 V to 3.6 V | — |
| Operating Voltage (VBAT variant) | 3.0 V to 5.5 V | — |
| RF Output Power | Up to 1.5 W into antenna load | [DATA_NEEDED: TX output power dBm] |
| Reader/Writer Mode | Yes | — |
| P2P / Card Emulation | Yes | — |
| Apple ECP Support | Yes (authorization required) | — |
| Integrated Firmware | Yes (loaded via I2C) | — |
| Cryptographic Acceleration | AES-128, Crypto1 | — |
| LPCD Current | ~100 uA | — |
| Boîtier | 40-VFQFN Exposed Pad (HVQFN, 6x6 mm) | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| Type de montage | Surface Mount | Surface Mount |
| Température de fonctionnement | -40 C to +85 C | -30 C to +85 C |
| Niveau MSL | 3 | — |
| Statut RoHS | Compliant | Compliant |
| Product Type | — | NFC Plug and Play Controller |
| Operating Frequency | — | 13.56 MHz |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Peak Reflow Temperature | — | 260 C (per JEDEC J-STD-020) |
| Moisture Sensitivity Level | — | MSL 3 |