PN7161A1HN vs PN7160A1HN 비교
다음의 상세 나란히 비교: PN7161A1HN 제조: NXP Semiconductors 및 PN7160A1HN 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | PN7161A1HN | PN7160A1HN |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | RF Modules | RF Modules |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $4.72 | $2.15 |
| 기능 | NFC Controller with NCI interface | — |
| RF Frequency | 13.56 MHz | — |
| Supported Protocols | ISO 14443 A/B, ISO 15693, FeliCa, MIFARE Classic, MIFARE DESFire, NTAG, NFC Forum Type 1-5 | FeliCa, ISO 14443, ISO 15693, MIFARE, NFC |
| Host Interface | NCI 1.0 over I2C | I2C (default, hardware) / SPI (EEPROM-configurable) |
| Operating Voltage (VCC) | 1.65 V to 3.6 V | — |
| Operating Voltage (VBAT variant) | 3.0 V to 5.5 V | — |
| RF Output Power | Up to 1.5 W into antenna load | [DATA_NEEDED: TX output power dBm] |
| Reader/Writer Mode | Yes | — |
| P2P / Card Emulation | Yes | — |
| Apple ECP Support | Yes (authorization required) | — |
| Integrated Firmware | Yes (loaded via I2C) | — |
| Cryptographic Acceleration | AES-128, Crypto1 | — |
| LPCD Current | ~100 uA | — |
| 패키지 | 40-VFQFN Exposed Pad (HVQFN, 6x6 mm) | HVQFN-40 (6 x 6 x 0.85 mm) with Exposed Pad |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 | -40 C to +85 C | -30 C to +85 C |
| MSL 레벨 | 3 | — |
| RoHS 상태 | Compliant | Compliant |
| Product Type | — | NFC Plug and Play Controller |
| Operating Frequency | — | 13.56 MHz |
| NCI Version | — | NCI 2.0 (pre-loaded firmware) |
| Digital Supply Voltage | — | 1.65 V to 1.95 V (VDD) |
| Analog/RF Supply Voltage | — | 3.0 V to 3.6 V (VBAT, VBAT_PA) |
| I/O Supply Voltage | — | 1.65 V to 1.95 V (VDDIO) |
| I2C Address | — | 0x28 (7-bit) |
| Antenna Pins | — | TX1, TX2 (differential); RX1, RX2 |
| Integrated MCU Core | — | ARM Cortex-M0 (ROM-resident NCI firmware) |
| Operating Modes | — | Reader/Writer, Card Emulation (P2P), Tag Detection |
| Modes of Operation | — | Active, Standby, Hard Power Down, Low-Power Polling |
| Peak Reflow Temperature | — | 260 C (per JEDEC J-STD-020) |
| Moisture Sensitivity Level | — | MSL 3 |