SN65HVD06D vs SN65HVD05D Comparaison
Comparaison détaillée côte à côte de SN65HVD06D par Texas Instruments et SN65HVD05D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD06D - High-Output RS-485 Transceiver, 8-SOIC | Texas Instruments (Tape & Reel)
SN65HVD06D ✓ ActifTexas Instruments
SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments
SN65HVD05D ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD06D | SN65HVD05D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS422, RS485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Débit de données | 10 Mbps | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| Tension d'alimentation | 4.5 V to 5.5 V | — |
| Température de fonctionnement | -40C to +85C | — |
| Minimum Differential Output Voltage | 2.5 V into 54 ohm load | 2.5 V into a 54-ohm load |
| Bus-Pin ESD Protection (HBM) | 16 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Failsafe | Open, short, and idle-bus | — |
| Standards Compliance | ANSI TIA/EIA-485-A, ISO 8482E | — |
| Boîtier | 8-pin SOIC (D) | 8-pin SOIC (D) |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | 1 (unlimited) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Product Type | — | Half-duplex RS-422/RS-485 transceiver |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Driver Output State | — | 3-state |
| Receiver Failsafe Behavior | — | Open-circuit, short-circuit, and idle-bus failsafe |
| Unit Load Option | — | 1/8 unit load |
| Maximum Node Count | — | Up to 256 nodes on the bus |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Driver Output Slew Rate | — | Controlled |
| Communication Mode | — | Half-duplex |
| Standards Compatibility | — | ANSI TIA/EIA-485-A and ISO 8482E |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |