SN65HVD06D vs SN65HVD05D तुलना

विस्तृत दोनों ओर की तुलना SN65HVD06D द्वारा Texas Instruments और SN65HVD05D द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN65HVD05D SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D - High-Output RS-485 Transceiver | Texas Instruments

SN65HVD05D ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN65HVD06D SN65HVD05D
ब्रांड Texas Instruments Texas Instruments
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
फ़ंक्शन Transceiver —
Protocol RS422, RS485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
डेटा दर 10 Mbps —
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis mV] —
सप्लाई वोल्टेज 4.5 V to 5.5 V —
ऑपरेटिंग तापमान -40C to +85C —
Minimum Differential Output Voltage 2.5 V into 54 ohm load 2.5 V into a 54-ohm load
Bus-Pin ESD Protection (HBM) 16 kV —
Unit Load 1/8 (up to 256 nodes) —
Failsafe Open, short, and idle-bus —
Standards Compliance ANSI TIA/EIA-485-A, ISO 8482E —
पैकेज 8-pin SOIC (D) 8-pin SOIC (D)
माउंटिंग प्रकार Surface Mount Surface mount
MSL स्तर 1 (unlimited) —
RoHS स्थिति Compliant [DATA_NEEDED: RoHS status]
Product Type — Half-duplex RS-422/RS-485 transceiver
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Supply Voltage Range — 4.5 V to 5.5 V
Driver Output State — 3-state
Receiver Failsafe Behavior — Open-circuit, short-circuit, and idle-bus failsafe
Unit Load Option — 1/8 unit load
Maximum Node Count — Up to 256 nodes on the bus
Bus-Pin ESD Protection — Exceeds 16 kV HBM
Driver Output Slew Rate — Controlled
Communication Mode — Half-duplex
Standards Compatibility — ANSI TIA/EIA-485-A and ISO 8482E
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध