SN65HVD50D vs SN65HVD51D Comparaison
Comparaison détaillée côte à côte de SN65HVD50D par Texas Instruments et SN65HVD51D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD50D - 25Mbps RS-485/RS-422 Transceiver | Texas Instruments
SN65HVD50D ✓ ActifTexas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD50D | SN65HVD51D |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | High-output full-duplex RS-485 driver and receiver | RS-422/RS-485 full-duplex transceiver |
| Supported Standards | RS-485 and RS-422 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Maximum Data Rate | 25 Mbps | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Receiver Hysteresis | 50 mV | — |
| Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | Up to 256 nodes |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | Exceeds 15 kV HBM |
| Standby Current | 1 µA | Less than 1 µA |
| Driver Transition-Time Options | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Plage de température de fonctionnement | -40 °C to +85 °C | -40 °C to 85 °C |
| Boîtier | 8-pin SOIC (D), 0.154 inch body width, 3.90 mm width | 8-pin SOIC (D) |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals | [DATA_NEEDED: conflict-minerals status] | — |
| Manufacturer Product Description | High Output Full-Duplex RS 485 Drivers and Receivers | — |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Maximum Signaling Rate | — | 5 Mbps |
| Interface Standards | — | RS-422 and RS-485 |
| Duplex Mode | — | Full-duplex |
| Receiver Unit Load | — | 1/8 unit load |
| Available Driver Transition Rates | — | 1 Mbps, 5 Mbps, and 25 Mbps |
| Enable Architecture | — | Fully enabled; no external enable pins |