SN65HVD50D vs SN65HVD51D Perbandingan
Perbandingan bersamaan detil SN65HVD50D dari Texas Instruments dan SN65HVD51D dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
SN65HVD50D - 25Mbps RS-485/RS-422 Transceiver | Texas Instruments
SN65HVD50D ✓ AktifTexas Instruments
SN65HVD51D - 5Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD51D ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | SN65HVD50D | SN65HVD51D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | High-output full-duplex RS-485 driver and receiver | RS-422/RS-485 full-duplex transceiver |
| Supported Standards | RS-485 and RS-422 | — |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Maximum Data Rate | 25 Mbps | — |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Receiver Hysteresis | 50 mV | — |
| Unit Load | 1/8 unit load | — |
| Maximum Bus Nodes | 256 nodes | Up to 256 nodes |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | Exceeds 15 kV HBM |
| Standby Current | 1 µA | Less than 1 µA |
| Driver Transition-Time Options | 1 Mbps, 5 Mbps, and 25 Mbps | — |
| Rentang Suhu Kerja | -40 °C to +85 °C | -40 °C to 85 °C |
| Paket | 8-pin SOIC (D), 0.154 inch body width, 3.90 mm width | 8-pin SOIC (D) |
| Tipe Mounting | Surface mount | Surface mount |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Conflict Minerals | [DATA_NEEDED: conflict-minerals status] | — |
| Manufacturer Product Description | High Output Full-Duplex RS 485 Drivers and Receivers | — |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Maximum Signaling Rate | — | 5 Mbps |
| Interface Standards | — | RS-422 and RS-485 |
| Duplex Mode | — | Full-duplex |
| Receiver Unit Load | — | 1/8 unit load |
| Available Driver Transition Rates | — | 1 Mbps, 5 Mbps, and 25 Mbps |
| Enable Architecture | — | Fully enabled; no external enable pins |