SN65HVD53D vs SN65HVD50D Comparaison

Comparaison détaillée côte à côte de SN65HVD53D par Texas Instruments et SN65HVD50D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Comparaison des spécifications

Paramètre SN65HVD53D SN65HVD50D
Marque Texas Instruments Texas Instruments
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Device Type Full-duplex RS-485 / RS-422 transceiver with enables —
Number of Drivers / Receivers 1 / 1 —
Driver Enable Polarity Active-high —
Receiver Enable Polarity Active-low —
Unit Load Option 1/8 unit-load option available (up to 256 nodes on the bus) —
Maximum Nodes on Bus 256 nodes —
Bus Pin ESD Protection Exceeds 15 kV HBM —
Driver Output Transition Time Options 1 Mbps, 5 Mbps and 25 Mbps signaling rates —
Standby Current 1 uA (both driver and receiver disabled) 1 µA
Receiver Output Glitch-free —
Standards Supported RS-485, RS-422 —
Supply Voltage Range [DATA_NEEDED: supply voltage range] 4.5 V to 5.5 V
Maximum Data Rate (this device) [DATA_NEEDED: maximum data rate for SN65HVD53D] —
Driver Output Current [DATA_NEEDED: high-output driver current] —
Receiver Sensitivity [DATA_NEEDED: receiver input sensitivity] —
Plage de température de fonctionnement -40 C to +85 C -40 °C to +85 °C
Boîtier SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch 8-pin SOIC (D), 0.154 inch body width, 3.90 mm width
Type de montage Surface mount Surface mount
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Product Type — High-output full-duplex RS-485 driver and receiver
Supported Standards — RS-485 and RS-422
Maximum Data Rate — 25 Mbps
Number of Drivers — 1
Number of Receivers — 1
Receiver Hysteresis — 50 mV
Unit Load — 1/8 unit load
Maximum Bus Nodes — 256 nodes
Bus-Pin ESD Protection — Exceeds 15 kV HBM
Driver Transition-Time Options — 1 Mbps, 5 Mbps, and 25 Mbps
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]
Conflict Minerals — [DATA_NEEDED: conflict-minerals status]
Manufacturer Product Description — High Output Full-Duplex RS 485 Drivers and Receivers

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis