SN65HVD53D vs SN65HVD50D 비교
다음의 상세 나란히 비교: SN65HVD53D 제조: Texas Instruments 및 SN65HVD50D 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Texas Instruments
SN65HVD53D - High-Output Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD53D ✓ 활성사양 비교
| 파라미터 | SN65HVD53D | SN65HVD50D |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Device Type | Full-duplex RS-485 / RS-422 transceiver with enables | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Driver Enable Polarity | Active-high | — |
| Receiver Enable Polarity | Active-low | — |
| Unit Load Option | 1/8 unit-load option available (up to 256 nodes on the bus) | — |
| Maximum Nodes on Bus | 256 nodes | — |
| Bus Pin ESD Protection | Exceeds 15 kV HBM | — |
| Driver Output Transition Time Options | 1 Mbps, 5 Mbps and 25 Mbps signaling rates | — |
| Standby Current | 1 uA (both driver and receiver disabled) | 1 µA |
| Receiver Output | Glitch-free | — |
| Standards Supported | RS-485, RS-422 | — |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 4.5 V to 5.5 V |
| Maximum Data Rate (this device) | [DATA_NEEDED: maximum data rate for SN65HVD53D] | — |
| Driver Output Current | [DATA_NEEDED: high-output driver current] | — |
| Receiver Sensitivity | [DATA_NEEDED: receiver input sensitivity] | — |
| 동작 온도 범위 | -40 C to +85 C | -40 °C to +85 °C |
| 패키지 | SOIC (D), 14 pins, 3.90 mm width, 0.154 inch pitch | 8-pin SOIC (D), 0.154 inch body width, 3.90 mm width |
| 실장 유형 | Surface mount | Surface mount |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | High-output full-duplex RS-485 driver and receiver |
| Supported Standards | — | RS-485 and RS-422 |
| Maximum Data Rate | — | 25 Mbps |
| Number of Drivers | — | 1 |
| Number of Receivers | — | 1 |
| Receiver Hysteresis | — | 50 mV |
| Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | 256 nodes |
| Bus-Pin ESD Protection | — | Exceeds 15 kV HBM |
| Driver Transition-Time Options | — | 1 Mbps, 5 Mbps, and 25 Mbps |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |
| Conflict Minerals | — | [DATA_NEEDED: conflict-minerals status] |
| Manufacturer Product Description | — | High Output Full-Duplex RS 485 Drivers and Receivers |