SP485ECN-L vs SP3232EET-L Comparaison
Comparaison détaillée côte à côte de SP485ECN-L par MaxLinear et SP3232EET-L par MaxLinear. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ Actif
Comparaison des spécifications
| Paramètre | SP485ECN-L | SP3232EET-L |
|---|---|---|
| Marque | MaxLinear | MaxLinear |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Unknown |
| Product Type | RS-422/RS-485 half-duplex line transceiver | RS-232 transceiver |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Tension d'alimentation | 5 V | — |
| Protocol Support | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | — |
| Débit de données | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps | 120 kbps |
| Technology | BiCMOS | — |
| Boîtier | 8-pin SOIC | 16-SOIC |
| Package Width | 0.154 in (3.90 mm) | — |
| Type de montage | Surface mount | Surface mount |
| Packaging | Tape and reel | — |
| Human Body Model ESD Tolerance | Over ±15 kV | — |
| IEC 61000-4-2 Air Discharge ESD Tolerance | Over ±15 kV | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| Courant d'alimentation | [DATA_NEEDED: typical and maximum supply current] | 1 mA |
| Differential Input Voltage | [DATA_NEEDED: receiver input voltage range] | — |
| Output Current | [DATA_NEEDED: driver output current] | — |
| Shutdown Support | Not stated for SP485ECN-L in the verified data | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | Lead-free product marking is stated in the verified search data | [DATA_NEEDED: lead-free status] |
| Transceiver Configuration | — | 2 transmit / 2 receive channels |
| Supply Voltage Range | — | +3.0 V to +5.5 V |
| Température de fonctionnement | — | -40 C to +85 C |
| Interface Standard | — | RS-232 / EIA/TIA-232-F |
| Charge-Pump Capacitor Requirement | — | 0.1 uF in 3.3 V operation |
| Shutdown Supply Current | — | 1 uA with receivers active |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |