SP485ECN-L vs SP3232EET-L Perbandingan
Perbandingan bersamaan detil SP485ECN-L dari MaxLinear dan SP3232EET-L dari MaxLinear. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ Aktif
Perbandingan Spesifikasi
| Parameter Umum | SP485ECN-L | SP3232EET-L |
|---|---|---|
| Merek | MaxLinear | MaxLinear |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Unknown |
| Product Type | RS-422/RS-485 half-duplex line transceiver | RS-232 transceiver |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Tegangan Pemuat | 5 V | — |
| Protocol Support | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | — |
| Laju Data | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps | 120 kbps |
| Technology | BiCMOS | — |
| Paket | 8-pin SOIC | 16-SOIC |
| Package Width | 0.154 in (3.90 mm) | — |
| Tipe Mounting | Surface mount | Surface mount |
| Packaging | Tape and reel | — |
| Human Body Model ESD Tolerance | Over ±15 kV | — |
| IEC 61000-4-2 Air Discharge ESD Tolerance | Over ±15 kV | — |
| Rentang Suhu Kerja | [DATA_NEEDED: operating temperature range] | — |
| Arus Pemuat | [DATA_NEEDED: typical and maximum supply current] | 1 mA |
| Differential Input Voltage | [DATA_NEEDED: receiver input voltage range] | — |
| Output Current | [DATA_NEEDED: driver output current] | — |
| Shutdown Support | Not stated for SP485ECN-L in the verified data | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | Lead-free product marking is stated in the verified search data | [DATA_NEEDED: lead-free status] |
| Transceiver Configuration | — | 2 transmit / 2 receive channels |
| Supply Voltage Range | — | +3.0 V to +5.5 V |
| Suhu Kerja | — | -40 C to +85 C |
| Interface Standard | — | RS-232 / EIA/TIA-232-F |
| Charge-Pump Capacitor Requirement | — | 0.1 uF in 3.3 V operation |
| Shutdown Supply Current | — | 1 uA with receivers active |
| Number of Drivers | — | 2 |
| Number of Receivers | — | 2 |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |