SP485ES-L vs MAX485ESA+ Comparaison
Comparaison détaillée côte à côte de SP485ES-L par MaxLinear et MAX485ESA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | SP485ES-L | MAX485ESA+ |
|---|---|---|
| Marque | MaxLinear | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | RS-485/RS-422 half-duplex transceiver | — |
| Transceiver Configuration | 1/1 transceiver | — |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| Duplex Mode | Half duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| Maximum Data Rate | 5000 kbps | — |
| Logic Technology | BiCMOS | — |
| Plage de température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 8-PDIP | 8-SOIC (SOIC-8) |
| Nombre de broches | 8 pins | — |
| Type de montage | Through-hole | Surface Mount |
| Tension d'alimentation | [DATA_NEEDED: supply voltage range] | 4.75 V to 5.25 V (5 V nominal) |
| Courant d'alimentation | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Resistance | [DATA_NEEDED: receiver input resistance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| ESD Protection Rating | [DATA_NEEDED: ESD protection rating] | — |
| Statut RoHS | unknown | Compliant (per Maxim/ADI datasheet suffix '+') |
| REACH Status | unknown | — |
| AEC-Q100 Status | not_applicable | — |
| Fonction | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Débit de données | — | 2.5 Mbps |
| Supply Current (unloaded) | — | 120 µA to 500 µA |
| Receiver Hysteresis | — | 70 mV (typ) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold (V_TH) | — | -0.2 V min / +0.2 V max |
| ESD Protection (HBM, driver output) | — | ±15 kV (per datasheet) |
| Unit Load | — | 1/8 (up to 256 transceivers on bus) |
| Température de fonctionnement | — | -40 °C to +85 °C |