SP485ES-L vs MAX485ESA+ Karşılaştırma

Ayrıntılı yan yana karşılaştırma SP485ES-L tarafından MaxLinear ve MAX485ESA+ tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre SP485ES-L MAX485ESA+
Marka MaxLinear Analog Devices
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type RS-485/RS-422 half-duplex transceiver —
Transceiver Configuration 1/1 transceiver —
Number of Drivers 1 driver —
Number of Receivers 1 receiver —
Duplex Mode Half duplex —
Supported Standards RS-485 and RS-422 —
Maximum Data Rate 5000 kbps —
Logic Technology BiCMOS —
İşletim Sıcaklığı Aralığı -40 C to +85 C —
Paket 8-PDIP 8-SOIC (SOIC-8)
Pin Sayısı 8 pins —
Montaj Türü Through-hole Surface Mount
Besleme Gerilimi [DATA_NEEDED: supply voltage range] 4.75 V to 5.25 V (5 V nominal)
Besleme Akımı [DATA_NEEDED: typical and maximum supply current] —
Driver Output Current [DATA_NEEDED: driver output current] —
Receiver Input Resistance [DATA_NEEDED: receiver input resistance] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] —
ESD Protection Rating [DATA_NEEDED: ESD protection rating] —
RoHS Durumu unknown Compliant (per Maxim/ADI datasheet suffix '+')
REACH Status unknown —
AEC-Q100 Status not_applicable —
Fonksiyon — Transceiver
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1/1
Duplex — Half
Veri Hızı — 2.5 Mbps
Supply Current (unloaded) — 120 µA to 500 µA
Receiver Hysteresis — 70 mV (typ)
Common-Mode Input Range — -7 V to +12 V
Differential Input Threshold (V_TH) — -0.2 V min / +0.2 V max
ESD Protection (HBM, driver output) — ±15 kV (per datasheet)
Unit Load — 1/8 (up to 256 transceivers on bus)
İşletim Sıcaklığı — -40 °C to +85 °C

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin