STM32H730IBK6Q vs STM32H745IIT6 Comparaison
Comparaison détaillée côte à côte de STM32H730IBK6Q par STMicroelectronics et STM32H745IIT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
STM32H730IBK6Q - 550MHz Cortex-M7 MCU, 128KB Flash | STMicroelectronics
STM32H730IBK6Q ✓ Actif
Comparaison des spécifications
| Paramètre | STM32H730IBK6Q | STM32H745IIT6 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Microcontrollers | Microcontrollers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $8,10 | $10,62 |
| Core | ARM Cortex-M7 with FPU (DP-FPU) | — |
| Maximum CPU Frequency | 550 MHz | — |
| Flash Memory | 128 KB | 2 MB (dual-bank, with secure sector) |
| SRAM Total | 564 KB | — |
| Instruction Cache (I-cache) | 16 KB | — |
| Data Cache (D-cache) | 16 KB | — |
| Backup SRAM | 4 KB | — |
| Boîtier | UFBGA 176+25 (10x10 mm) | 176-pin LQFP (24x24 mm) |
| Operating Voltage | 1.62 V to 3.6 V | — |
| Température de fonctionnement | -40 C to +85 C (grade 6 suffix) | — |
| Crypto/Hash Accelerator | AES, SHA, RSA, ECDSA | — |
| External Memory Interface | FMC (SRAM/PSRAM/NOR/NAND) | — |
| ADC | 2x 16-bit (up to 3.6 MSPS) | 16-bit ADC (3.6 MSPS) + two 12-bit ADCs |
| Communication | Ethernet, USB OTG, 3x FDCAN, SPI, I2C, UART | — |
| Graphics Support | Chrom-ART, JPEG codec | — |
| Integrated SMPS | Yes (step-down for core supply) | — |
| Statut RoHS | Compliant | Compliant |
| Core Architecture | — | Dual-core Arm Cortex-M7 + Cortex-M4 with FPU |
| M7 Maximum Clock Frequency | — | 480 MHz |
| M4 Maximum Clock Frequency | — | 240 MHz |
| SRAM (Total) | — | 1 MB (192 KB DTCM/AXI + 64 KB DTCM for M4 + 462 KB system SRAM + 4 KB backup) |
| Operating Voltage Range | — | 1.62 V to 3.6 V |
| Type de montage | — | Surface Mount |
| Plage de température de fonctionnement | — | -40 °C to +85 °C (industrial grade) |
| DAC | — | Two 12-bit DACs |
| Graphics Accelerator | — | Chrom-ART (DMA2D) |
| Communication Interfaces | — | USB OTG FS+HS, 2 × CAN FD, Ethernet MAC, SDMMC, 2 × OctoSPI, FMC, USART/UART/SPI/I2C/LPUART |
| Timers | — | Advanced-control, general-purpose, basic, low-power timers (see datasheet for full list) |
| Niveau MSL | — | 3 (per JEDEC J-STD-020) |
| Supply Source | — | Internal SMPS + LDO regulators |