STM32L4R9VGT6 vs STM32L4R5VIT6 Comparaison

Comparaison détaillée côte à côte de STM32L4R9VGT6 par STMicroelectronics et STM32L4R5VIT6 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

STMicroelectronics
STM32L4R9VGT6 STM32L4R9VGT6 - 120MHz Cortex-M4 1MB MCU | STMicroelectronics

STM32L4R9VGT6 - 120MHz Cortex-M4 1MB MCU | STMicroelectronics

STM32L4R9VGT6 ✓ Actif
STMicroelectronics
STM32L4R5VIT6 STM32L4R5VIT6 - 2MB Flash Cortex-M4 MCU 120MHz | STMicroelectronics

STM32L4R5VIT6 - 2MB Flash Cortex-M4 MCU 120MHz | STMicroelectronics

STM32L4R5VIT6 ✓ Actif

Comparaison des spécifications

Paramètre STM32L4R9VGT6 STM32L4R5VIT6
Marque STMicroelectronics STMicroelectronics
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Product Type 32-bit ultra-low-power microcontroller —
Processor Core Arm Cortex-M4 32-bit RISC core —
Maximum CPU Frequency 120 MHz —
Flash Memory 1 MB (1M x 8) —
Operating Supply Voltage Range 1.71 V to 3.6 V —
Temperature Range -40 °C to 85 °C or -40 °C to 125 °C —
Shutdown Mode Current 33 nA —
VBAT Mode Current 305 nA —
Backup Registers 32 x 32-bit —
USB Interface USB OTG —
Digital Filter for Sigma-Delta Modulators DFSD —
Power Management Architecture FlexPowerControl —
Batch Acquisition Mode BAM —
Boîtier 100-pin LQFP, 14 x 14 mm 100-pin LQFP (14x14 mm)
Type de montage Surface mount Surface Mount
Statut RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Architecture — ARM Cortex-M4 32-bit RISC with FPU
Fréquence d'horloge maximale — 120 MHz (150 DMIPS)
Program Memory (Flash) — 2 MB (dual-bank, read-while-write)
SRAM — 640 KB
Operating Voltage Range — 1.71 V to 3.6 V
I/O Voltage Range — 1.08 V to 3.6 V (independent VDDIO)
GPIO Count — 83 (typical)
ADC — 2x 12-bit, 5 Msps
DAC — 2x 12-bit
Communication Interfaces — USB OTG FS, 3x SPI, 3x I2C, 6x USART, 2x UART, 2x CAN, 1x SDMMC
Display Interface — LCD-TFT controller; MIPI-DSI on higher part numbers
External Memory Interface — Octal-SPI, SDMMC, FSMC (SRAM/NOR/NAND)
Low-Power Modes — STOP, STANDBY, SHUTDOWN; integrated SMPS step-down
Température de fonctionnement — -40C to +85C (industrial grade)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis