TCA6416ARTWR vs TCA6424ARGJR Comparaison
Comparaison détaillée côte à côte de TCA6416ARTWR par Texas Instruments et TCA6424ARGJR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TCA6416ARTWR - 16-Bit I2C I/O Expander with Voltage Translation | TI
TCA6416ARTWR ✓ ActifTexas Instruments
TCA6424ARGJR - 24-bit I2C/SMBus I/O Expander | Texas Instruments
TCA6424ARGJR ✓ ActifComparaison des spécifications
| Paramètre | TCA6416ARTWR | TCA6424ARGJR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,05 | $1,55 |
| Product Type | I/O Expander (I2C/SMBus) | — |
| Number of I/O Bits | 16 | 24 |
| Interface | I2C, SMBus | I2C, SMBus |
| I2C Clock Frequency (Max) | 400 kHz | — |
| Operating Supply Voltage (VCCI/VCCP) | 1.65 V to 5.5 V | — |
| Host-side Logic Level (VCCI) | 1.65 V to 5.5 V | — |
| Port-side I/O Level (VCCP) | 1.65 V to 5.5 V | — |
| Voltage Translation | Yes (between host and port banks) | — |
| Hardware Address Pins | 3 (A0, A1, A2) - up to 8 devices / bus | A0, A1, A2 (3 pins, up to 8 devices on bus) |
| Interrupt Output | Yes (open-drain, active-low INT) | Yes (open-drain INT, active-low) |
| Reset Input | Yes (active-low) | — |
| Output Drive (sink, per pin) | 25 mA | — |
| Output Drive (source, per pin) | 10 mA | — |
| ESD Rating (HBM) | 2000 V | — |
| Température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 24-WQFN (RTW) 4x4 mm with exposed pad | UQFN-32 (RGJ) 5x5 mm with EP |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2 (1 year floor life) | — |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| I2C Clock Frequency | — | up to 400 kHz |
| Operating Supply Voltage (VCCI) | — | 1.65 V to 5.5 V |
| P-port Voltage (VCCP) | — | 1.65 V to 5.5 V |
| Number of Ports | — | 3 x 8-bit (P0, P1, P2) |
| Reset Pin | — | Yes (RESET, active-low) |
| Configuration Registers | — | Yes (separate input/output/polarity/configuration) |
| Plage de température de fonctionnement | — | -40C to +85C (industrial) |
| ESD Rating | — | [DATA_NEEDED: HBM/CDM ESD rating] |