THS1040CPWRG4 vs THS1215IPWR Comparaison
Comparaison détaillée côte à côte de THS1040CPWRG4 par Texas Instruments et THS1215IPWR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
THS1040CPWRG4 - 10-Bit 40 MSPS Low-Power ADC | Texas Instruments
THS1040CPWRG4 ✓ ActifTexas Instruments
THS1215IPWR - 12-Bit, 15 MSPS Low-Power ADC | Texas Instruments
THS1215IPWR ✓ ActifComparaison des spécifications
| Paramètre | THS1040CPWRG4 | THS1215IPWR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,10 | $6,72 |
| Résolution | 10 bit | 12 bit |
| Number of Channels | 1 Input | 1 |
| Fréquence d'échantillonnage | 40 MSPS | — |
| Architecture | Pipelined | Pipelined CMOS ADC |
| Analog Supply Voltage | 3 V | — |
| Digital Supply Voltage | 3 V | — |
| Analog Input Configuration | Single-ended or Differential | — |
| Differential Nonlinearity (DNL) | ±0.45 LSB (typ) | — |
| Signal-to-Noise Ratio (SNR) | 60 dB typ at 4.8 MHz | — |
| Spurious-Free Dynamic Range (SFDR) | 72 dB | — |
| Internal Voltage Reference | Adjustable, supports 1 Vp-p and 2 Vp-p full-scale | — |
| Input Range | 1 Vp-p to 2 Vp-p (configurable) | — |
| Plage de température de fonctionnement | 0C to +70C (commercial grade) | — |
| Boîtier | 28-pin TSSOP (PW) | 28-TSSOP (PW), 9.7 mm x 6.4 mm |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant (Pb-free G4 finish) | Compliant |
| Niveau MSL | 2 (per TI standard) | 2 (1 year floor life) |
| Sample Rate | — | 15 MSPS |
| Tension d'alimentation | — | 3.3 V (single supply) |
| Input Configuration | — | Single-ended / Single-ended with offset / Differential |
| Input Bandwidth | — | 150 MHz (typ) |
| Analog Input Range | — | 1 Vpp to 2 Vpp differential |
| SNR | — | 65 dB at fin = 5 MHz (typ) |
| SFDR | — | 70 dB (typ) |
| ENOB | — | [DATA_NEEDED: ENOB in bits] |
| Internal Reference | — | 1.5 V (external override supported) |
| Output Interface | — | Parallel CMOS, 12-bit straight binary |
| Latency | — | 5 clock cycles |
| Power Dissipation | — | 174 mW at 15 MSPS (typ) |
| Power-Down Mode | — | Yes (PD pin) |
| Out-of-Range Indicator | — | Yes (OTR pin) |
| Température de fonctionnement | — | -40C to +85C |