THVD1552DR vs MAX3485ESA+ Comparaison
Comparaison détaillée côte à côte de THVD1552DR par Texas Instruments et MAX3485ESA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | THVD1552DR | MAX3485ESA+ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Type | Transceiver | — |
| Protocol | RS-485 / RS-422 | — |
| Number of Drivers/Receivers | 1 / 1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Signaling Rate (max) | 50 Mbps | — |
| Bus-Pin ESD Protection (HBM) | ±18 kV (IEC 61000-4-2 contact/air) | — |
| IEC EFT Immunity | ±4 kV (IEC 61000-4-4 fast transient) | — |
| Receiver Fail-Safe | Yes (open, short, idle bus to logic-high) | — |
| Unit Load | 1/8 unit load (up to 256 nodes per bus) | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | 14-SOIC (D), 3.90 mm width | 8-pin SOIC |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | MSL1-260C-UNLIM (per PartGenie) | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | Yes (TI product page) | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Tension d'alimentation | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate-limited true transceiver |
| Power Class | — | Low-power transceiver |
| Production Status | — | PRODUCTION |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Courant d'alimentation | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |