THVD1552DR vs MAX3485ESA+ Сравнение
Подробное сравнение бок о бок THVD1552DR от Texas Instruments и MAX3485ESA+ от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Analog Devices
MAX3485ESA+ - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+ ✓ АктивенСравнение характеристик
| Параметр | THVD1552DR | MAX3485ESA+ |
|---|---|---|
| Бренд | Texas Instruments | Analog Devices |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Type | Transceiver | — |
| Protocol | RS-485 / RS-422 | — |
| Number of Drivers/Receivers | 1 / 1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3 V to 5.5 V | — |
| Signaling Rate (max) | 50 Mbps | — |
| Bus-Pin ESD Protection (HBM) | ±18 kV (IEC 61000-4-2 contact/air) | — |
| IEC EFT Immunity | ±4 kV (IEC 61000-4-4 fast transient) | — |
| Receiver Fail-Safe | Yes (open, short, idle bus to logic-high) | — |
| Unit Load | 1/8 unit load (up to 256 nodes per bus) | — |
| Диапазон рабочих температур | -40 °C to +125 °C | — |
| Корпус | 14-SOIC (D), 3.90 mm width | 8-pin SOIC |
| Тип монтажа | Surface Mount | Surface mount |
| Уровень MSL | MSL1-260C-UNLIM (per PartGenie) | — |
| Статус RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free / Halogen-Free | Yes (TI product page) | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Напряжение питания | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate-limited true transceiver |
| Power Class | — | Low-power transceiver |
| Production Status | — | PRODUCTION |
| Рабочая температура | — | [DATA_NEEDED: operating temperature range] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Ток потребления | — | [DATA_NEEDED: typical and maximum supply current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |