TJA1024HG vs TJA1022TK Comparaison

Comparaison détaillée côte à côte de TJA1024HG par NXP Semiconductors et TJA1022TK par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
TJA1024HG TJA1024HG - Quad LIN 2.2A/SAE J2602 Transceiver | NXP

TJA1024HG - Quad LIN 2.2A/SAE J2602 Transceiver | NXP

TJA1024HG ✓ Actif
NXP Semiconductors
TJA1022TK TJA1022TK - Dual LIN 2.2A Transceiver HVSON14 | NXP

TJA1022TK - Dual LIN 2.2A Transceiver HVSON14 | NXP

TJA1022TK ✓ Actif

Comparaison des spécifications

Paramètre TJA1024HG TJA1022TK
Marque NXP Semiconductors NXP Semiconductors
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $2,84 $0,84
Fonction Quad LIN 2.2A/SAE J2602 transceiver Dual LIN 2.2A / SAE J2602 transceiver
Number of LIN Channels 4 (two independent dual-LIN transceivers) —
Débit de données Up to 20 kBd —
LIN Compliance LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 —
LIN Bus Peak Current 2.2 A —
Supply Voltage (VBAT) 5 V to 27 V (load-dump tolerant to 40 V) —
Sleep Mode Current < 10 uA (typical per dual channel) —
Température de fonctionnement -40 C to +125 C —
ESD (LIN pin, HBM) [DATA_NEEDED: HBM ESD value V] —
Boîtier DHVQFN-24 (SOT815-1), 3.5 x 5.5 mm HVSON14 (3 x 4.5 mm) with exposed pad
Type de montage Surface Mount Surface Mount
AEC-Q100 Qualified —
Statut RoHS Compliant Compliant
Software Compatibility TJA1022, TJA1027, TJA1029 —
Nombre de broches 24 —
Number of Channels — 2 (dual LIN)
Protocol — LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602
Maximum Baud Rate — 20 kBd
Plage de température de fonctionnement — -40 C to +85 C [DATA_NEEDED: full automotive grade -40 to +125 C to be confirmed against datasheet]
Tension d'alimentation — [DATA_NEEDED: Vbat operating range]
Quiescent Current (Sleep) — [DATA_NEEDED: typical sleep Iq]
Bus Pin ESD Protection — [DATA_NEEDED: HBM/CDM ESD rating on LIN pins]
Transient Protection — ISO 7637 (per automotive LIN conformance)
Leader / Leader Capability — Yes (each channel)
Pin Compatibility — Pin compatible with TJA1020, TJA1021, TJA1027, TJA1029 (SO14 / HVSON14 footprint)
Niveau MSL — [DATA_NEEDED: MSL rating]

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis