TJA1024HGZ vs TJA1024HG Comparaison
Comparaison détaillée côte à côte de TJA1024HGZ par NXP Semiconductors et TJA1024HG par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TJA1024HGZ | TJA1024HG |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Unknown | Actif |
| Product Type | Quad LIN 2.2A/SAE J2602 transceiver | — |
| LIN Channel Count | 4 channels | — |
| Maximum LIN Baud Rate | 20 kBd | — |
| LIN Standard Compliance | LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 | — |
| Supply Voltage Feature | 5 V to 18 V | — |
| Software Compatibility | Compatible with TJA1022, TJA1027, and TJA1029 | TJA1022, TJA1027, TJA1029 |
| Bus Output Pull-Up | Internal termination resistors pull LIN bus outputs HIGH | — |
| Signal Shaping | Optimized LIN bus signals designed to minimize electromagnetic emissions | — |
| Primary Application | In-vehicle LIN subnets | — |
| Boîtier | 24-DHVQFN, 5.5 mm x 3.5 mm | DHVQFN-24 (SOT815-1), 3.5 x 5.5 mm |
| Type de montage | Surface mount | Surface Mount |
| Nombre de broches | 24 pins | 24 |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | — |
| LIN Transmitter Current | [DATA_NEEDED: LIN transmitter current] | — |
| Receiver Supply Current | [DATA_NEEDED: receiver supply current] | — |
| Transmitter Propagation Delay | [DATA_NEEDED: transmitter propagation delay] | — |
| Receiver Propagation Delay | [DATA_NEEDED: receiver propagation delay] | — |
| Bus Fault Detection | [DATA_NEEDED: LIN bus fault detection functions] | — |
| Statut RoHS | unknown | Compliant |
| REACH Status | unknown | — |
| Fonction | — | Quad LIN 2.2A/SAE J2602 transceiver |
| Number of LIN Channels | — | 4 (two independent dual-LIN transceivers) |
| Débit de données | — | Up to 20 kBd |
| LIN Compliance | — | LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A, SAE J2602 |
| LIN Bus Peak Current | — | 2.2 A |
| Supply Voltage (VBAT) | — | 5 V to 27 V (load-dump tolerant to 40 V) |
| Sleep Mode Current | — | < 10 uA (typical per dual channel) |
| Température de fonctionnement | — | -40 C to +125 C |
| ESD (LIN pin, HBM) | — | [DATA_NEEDED: HBM ESD value V] |
| AEC-Q100 | — | Qualified |