TL072CP vs TL072CDR Comparaison
Comparaison détaillée côte à côte de TL072CP par Texas Instruments et TL072CDR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ ActifComparaison des spécifications
| Paramètre | TL072CP | TL072CDR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,31 | $0,09 |
| Manufacturer | Texas Instruments | — |
| Part Status | Active | — |
| Amplifier Type | JFET-Input Operational Amplifier | Dual operational amplifier |
| Number of Circuits | 2 (Dual) | — |
| Slew Rate | 13 V/µs (typical) | 13 V/µs |
| Gain Bandwidth Product | 3 MHz (typical) | — |
| Input Bias Current | 30 pA (typical) | Low; exact value not supplied in verified data |
| Input Offset Voltage | 3 mV (typical, C grade) | [DATA_NEEDED: input offset voltage] |
| Input Noise Voltage Density | 18 nV/√Hz (typical at 1 kHz) | — |
| Total Harmonic Distortion | 0.003% (typical) | — |
| Supply Voltage Range (Dual) | ±3.5 V to ±18 V | — |
| Supply Voltage Range (Single) | 7 V to 36 V | — |
| Plage de température de fonctionnement | 0°C to +70°C (C grade) | [DATA_NEEDED: operating temperature range] |
| Boîtier / Format | 8-PDIP (Plastic DIP, through-hole) | — |
| Type de montage | Through Hole | Surface mount |
| Nombre de broches | 8 | — |
| Output Short-Circuit Protection | Yes | Yes |
| Internal Frequency Compensation | Yes | — |
| Latch-up Free Operation | Yes | — |
| Statut RoHS | Compliant | — |
| Input Stage | — | JFET-input |
| Number of Amplifiers | — | 2 |
| Gain-Bandwidth Product | — | 3 MHz |
| Listed Supply Voltage Range | — | 7 V to 36 V |
| Boîtier | — | 8-pin SOIC |
| Frequency Compensation | — | Internal |
| Input Impedance | — | High; exact value not supplied in verified data |
| Low Total Harmonic Distortion | — | Yes; exact value not supplied in verified data |
| Bruit de sortie | — | [DATA_NEEDED: output noise] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |