TLE82422LXUMA2 vs TLE9166EQXUMA1 Comparaison
Comparaison détaillée côte à côte de TLE82422LXUMA2 par Infineon et TLE9166EQXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
TLE82422LXUMA2 - 8-Ch Low-Side Constant Current Pre-Driver | Infineon
TLE82422LXUMA2 ✓ Actif
Comparaison des spécifications
| Paramètre | TLE82422LXUMA2 | TLE9166EQXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $7,40 | $2,15 |
| Fonction | 8-channel low-side constant-current pre-driver | — |
| Number of Channels | 8 | — |
| Supply Voltage Range (VS) | 5.5 V to 42 V | — |
| Logic Supply (VCC) | 5 V (internal regulator) | — |
| Operating Mode | Direct PWM or constant-current (SPI-configurable per channel) | — |
| Control Interface | SPI (16-bit messages) | — |
| PWM Mode | Fixed frequency per channel | — |
| Configuration de sortie | Low-side (drives external N-MOSFET gates) | NMOS, half-bridge |
| Current Sensing | External shunt resistor | — |
| Diagnostics | Open load, short circuit, overtemperature (per channel) | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (junction) | — |
| Boîtier | PG-LQFP-64-4 (64-pin LQFP with exposed pad) | PG-TSDSO-32-1 |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | Compliant |
| AEC-Q100 Qualification | Automotive qualified | — |
| Product Type | — | Multi Half-Bridge Motor Driver IC |
| Number of Half-Bridges | — | 6 |
| Interface | — | SPI |
| PWM Frequency | — | 25 kHz (engine) |
| Supply Pin - VS | — | Battery supply for half-bridges (range [DATA_NEEDED: VS min/max]) |
| Supply Pin - VDD | — | Logic supply for SPI and I/O (range [DATA_NEEDED: VDD min/max]) |
| Charge Pump | — | Integrated CP pin for high-side gate drive |
| Nombre de broches | — | 32 |
| Integrated Protection | — | Over-current, over-temperature, under-voltage lockout (per datasheet) |
| Target Application | — | Automotive door lock, body electronics brushed DC motors |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |