TLE9201SGAUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de TLE9201SGAUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | TLE9201SGAUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,98 | $3,18 |
| Topologie | H-Bridge (2 half-bridges) | — |
| Output Current (Continuous) | 6 A | — |
| Current Limitation Threshold | 8 A | — |
| RDS(on) per Switch (typ.) | < 100 mOhm | — |
| Operating Voltage Range | 5.0 V to 28 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Input Compatibility | 3.3 V / 5.5 V | — |
| PWM Frequency (max) | 20 kHz | — |
| Control Interface | PWM/DIR + SPI diagnostics | — |
| Standby Current | Low (per datasheet) | — |
| Protection Features | Short circuit, Over-temperature, Open load | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Boîtier | PG-DSO-12-17 (12-pin exposed-pad SOIC) | PG-TSDSO-14 (exposed thermal pad) |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | -40 °C to +150 °C junction |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Niveau MSL | [DATA_NEEDED: MSL level] | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |