TLE9201SGAUMA1 vs BTS70402EPGXUMA1 Comparação
Comparação detalhada lado a lado de TLE9201SGAUMA1 por Infineon e BTS70402EPGXUMA1 por Infineon. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | TLE9201SGAUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marca | Infineon | Infineon |
| Categoria | Motor Drivers | Power MOSFET Drivers |
| Status do ciclo de vida | Ativo | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $0,98 | $3,18 |
| Topologia | H-Bridge (2 half-bridges) | — |
| Output Current (Continuous) | 6 A | — |
| Current Limitation Threshold | 8 A | — |
| RDS(on) per Switch (typ.) | < 100 mOhm | — |
| Operating Voltage Range | 5.0 V to 28 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Logic Input Compatibility | 3.3 V / 5.5 V | — |
| PWM Frequency (max) | 20 kHz | — |
| Control Interface | PWM/DIR + SPI diagnostics | — |
| Standby Current | Low (per datasheet) | — |
| Protection Features | Short circuit, Over-temperature, Open load | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Encapsulamento | PG-DSO-12-17 (12-pin exposed-pad SOIC) | PG-TSDSO-14 (exposed thermal pad) |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | -40 °C to +150 °C junction |
| Tipo de montagem | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| Nível MSL | [DATA_NEEDED: MSL level] | — |
| Status RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Função | — | Smart High-Side Power Switch |
| Number of Channels | — | 4 |
| Configuração de saída | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |