TLE95613QXXUMA1 vs TLE9461ESV33XUMA1 Comparaison
Comparaison détaillée côte à côte de TLE95613QXXUMA1 par Infineon et TLE9461ESV33XUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
TLE95613QXXUMA1 - 48V BLDC Motor Driver, Half-Bridge, SPI | Infineon
TLE95613QXXUMA1 ✓ ActifInfineon
TLE9461ESV33XUMA1 - OPTIREG Lite SBC, CAN FD, 5V/3.3V LDO | Infineon
TLE9461ESV33XUMA1 ✓ ActifComparaison des spécifications
| Paramètre | TLE95613QXXUMA1 | TLE9461ESV33XUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Motor Drivers | Power Management |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,78 | $1,91 |
| Fonction | Multifunctional BLDC motor driver system IC | — |
| Supply Voltage Range | 5.5 V to 28 V | — |
| Configuration de sortie | 4 half-bridge NMOS (extendable to 6) | — |
| Communication Interfaces | SPI, CAN-FD, LIN | — |
| Internal LDO Output | 5 V and 3.3 V trackers | — |
| Courant de repos | 18 µA typical | — |
| Température de jonction en fonctionnement | -40 °C to +150 °C | — |
| Boîtier | PG-VQFN-48-31 (exposed pad) | PG-TSDSO-24-1 (24-pin TSDSO with exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Short-Circuit Protection | Yes (per output, diagnostics via SPI) | — |
| Over-Temperature Protection | Yes (OTP, thermal warning and shutdown) | — |
| Charge Pump | Integrated for high-side gate drive | — |
| Niveau MSL | [DATA_NEEDED: MSL level per JEDEC J-STD-020] | MSL3 (per JEDEC J-STD-020) |
| AEC-Q100 | Qualified (automotive grade) | Qualified (automotive grade) |
| Statut RoHS | Compliant | Compliant |
| Lead-Free / Halogen-Free | Yes / [DATA_NEEDED: halogen-free status] | — |
| Product Type | — | System Basis Chip (SBC) - OPTIREG Lite |
| CAN Transceiver | — | CAN FD, up to 5 Mbps, ISO 11898-1 compliant |
| 5 V LDO Output Current | — | 250 mA |
| 3.3 V LDO Output | — | Yes, integrated |
| Supply Voltage (VBAT) | — | 5.5 V to 28 V (jump start tolerant per data) |
| Quiescent Current (Sleep) | — | [DATA_NEEDED: sleep Iq in uA] |
| Watchdog | — | Yes (hardware and software modes) |
| Wake Inputs | — | Yes (CAN and pin wake) |
| Reset Output | — | Yes, with adjustable threshold |
| Température de fonctionnement | — | -40 C to +150 C (junction) |
| ESD (CAN Bus, HBM) | — | [DATA_NEEDED: ESD rating kV HBM] |
| Thermal Resistance RthJA | — | [DATA_NEEDED: theta_JA in C/W] |
| Moisture Sensitivity | — | MSL3 |