TS934ID vs LM324D Comparaison
Comparaison détaillée côte à côte de TS934ID par STMicroelectronics et LM324D par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
TS934ID - 4-Channel 2.7V R-R Micropower Op Amp | STMicroelectronics
TS934ID ObsoleteTexas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ ActifComparaison des spécifications
| Paramètre | TS934ID | LM324D |
|---|---|---|
| Marque | STMicroelectronics | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Obsolete | Actif |
| Number of Amplifiers | 4 circuits | 4 |
| Amplifier Type | General-purpose operational amplifier | Quad general-purpose operational amplifier |
| Supply Voltage Range | 2.7V to 10V | 3 V to 36 V for B versions |
| Single-Supply Operation | Yes | — |
| Type de sortie | Rail-to-rail output | Single-ended output |
| Gain-Bandwidth Product | 100kHz | — |
| Slew Rate | 0.05V/us | [DATA_NEEDED: slew rate] |
| Typical Supply Current | 20uA | — |
| Output Voltage Swing | 2.9Vpp at 3V supply with 100kohm load | — |
| Input Bias Current | 1pA typical | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | Plus or minus 2 mV maximum for BA versions at 25 C |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Plage de température de fonctionnement | -40C to +105C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 14-SOIC, 0.154 inch width, 3.90mm width | 14-pin SOIC |
| Type de montage | Surface Mount | Surface mount |
| Automotive Grade | Not indicated in supplied data | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| ESD Protection | Present according to supplied TS93x family description | 2 kV HBM for B, BA, and K versions |
| Architecture | — | Four independent high-gain frequency-compensated operational amplifiers |
| Input Filtering | — | Internal RF and EMI filter for B and BA versions |
| Supply Configuration | — | Single supply or split supply |
| Frequency Compensation | — | Internal |
| Device Type | — | Low-power operational amplifier |
| Input Type | — | Differential input |
| Operating Class | — | Standard general purpose |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output swing] |