TS934ID vs LM324D Comparação
Comparação detalhada lado a lado de TS934ID por STMicroelectronics e LM324D por Texas Instruments. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
STMicroelectronics
TS934ID - 4-Channel 2.7V R-R Micropower Op Amp | STMicroelectronics
TS934ID ObsoleteTexas Instruments
LM324D - Quad 36V Op Amp | Texas Instruments | SOIC-14 (Tape & Reel)
LM324D ✓ AtivoComparação de especificações
| Parâmetro | TS934ID | LM324D |
|---|---|---|
| Marca | STMicroelectronics | Texas Instruments |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Obsolete | Ativo |
| Number of Amplifiers | 4 circuits | 4 |
| Amplifier Type | General-purpose operational amplifier | Quad general-purpose operational amplifier |
| Supply Voltage Range | 2.7V to 10V | 3 V to 36 V for B versions |
| Single-Supply Operation | Yes | — |
| Tipo de saída | Rail-to-rail output | Single-ended output |
| Gain-Bandwidth Product | 100kHz | — |
| Slew Rate | 0.05V/us | [DATA_NEEDED: slew rate] |
| Typical Supply Current | 20uA | — |
| Output Voltage Swing | 2.9Vpp at 3V supply with 100kohm load | — |
| Input Bias Current | 1pA typical | [DATA_NEEDED: input bias current] |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | Plus or minus 2 mV maximum for BA versions at 25 C |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Faixa de temperatura de operação | -40C to +105C | [DATA_NEEDED: operating temperature range] |
| Encapsulamento | 14-SOIC, 0.154 inch width, 3.90mm width | 14-pin SOIC |
| Tipo de montagem | Surface Mount | Surface mount |
| Automotive Grade | Not indicated in supplied data | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| ESD Protection | Present according to supplied TS93x family description | 2 kV HBM for B, BA, and K versions |
| Architecture | — | Four independent high-gain frequency-compensated operational amplifiers |
| Input Filtering | — | Internal RF and EMI filter for B and BA versions |
| Supply Configuration | — | Single supply or split supply |
| Frequency Compensation | — | Internal |
| Device Type | — | Low-power operational amplifier |
| Input Type | — | Differential input |
| Operating Class | — | Standard general purpose |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |
| Gain Bandwidth Product | — | [DATA_NEEDED: gain bandwidth product] |
| Output Current | — | [DATA_NEEDED: output current] |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input range] |
| Output Swing | — | [DATA_NEEDED: output swing] |