TUSB215RGYT vs TUSB213RGYT Comparaison
Comparaison détaillée côte à côte de TUSB215RGYT par Texas Instruments et TUSB213RGYT par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TUSB215RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB215RGYT ✓ ActifTexas Instruments
TUSB213RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB213RGYT ✓ ActifComparaison des spécifications
| Paramètre | TUSB215RGYT | TUSB213RGYT |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | USB Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | USB 2.0 high-speed signal conditioner | — |
| USB Speed | 480 Mbit/s high speed | — |
| Supported USB Modes | USB 2.0, OTG 2.0, BC 1.2 | — |
| Supported Signaling Rates | Low-Speed, Full-Speed, High-Speed | — |
| Number of Channels | 1 | — |
| DC Boost | Supported | — |
| Battery Charging | Integrated USB BC1.2 CDP | — |
| CDP Configuration | Pin strap or I²C | — |
| VBUS Supply | Integrated | — |
| Data Path Interchangeability | D1P/M and D2P/M interchangeable | — |
| Host or Device Operation | Host and device agnostic | — |
| Daisy Chain Support | Supported | — |
| Pre-Channel Cable Length | Up to 5 m | — |
| Post-Channel Cable Length | Up to 2 m | — |
| Boîtier | 14-pin VQFN (RGY), 3.5 x 3.5 mm | — |
| Type de montage | Surface mount | Surface mount |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | USB 2.0 high-speed signal conditioner with DC boost |
| USB Compatibility | — | USB 2.0 |
| OTG Compatibility | — | USB OTG 2.0 |
| Battery Charging Compatibility | — | Battery Charging 1.2 |
| Supply Voltage Range | — | 4.4 V to 5.5 V |
| Supported USB Signaling | — | Low-speed, full-speed, and high-speed |
| Configuration Interface | — | Pin strap or I2C |
| AC Boost Settings | — | 4 selectable settings |
| Maximum Pre-Channel Cable Length | — | 5 m |
| Maximum Post-Channel Cable Length | — | 2 m |
| Daisy-Chain Support | — | Supported |
| D1P/M and D2P/M Support | — | Interchangeable |
| Host and Device Operation | — | Host-agnostic and device-agnostic |
| Package Type | — | 14-pin VQFN (RGY) |
| Package Dimensions | — | 3.5 mm x 3.5 mm |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |