TUSB215RGYT vs TUSB213RGYT So sánh
So sánh chi tiết song song của TUSB215RGYT bằng Texas Instruments và TUSB213RGYT bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
TUSB215RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB215RGYT ✓ Hoạt độngTexas Instruments
TUSB213RGYT - USB 2.0 HS Signal Conditioner | Texas Instruments
TUSB213RGYT ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | TUSB215RGYT | TUSB213RGYT |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | USB Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Device Type | USB 2.0 high-speed signal conditioner | — |
| USB Speed | 480 Mbit/s high speed | — |
| Supported USB Modes | USB 2.0, OTG 2.0, BC 1.2 | — |
| Supported Signaling Rates | Low-Speed, Full-Speed, High-Speed | — |
| Number of Channels | 1 | — |
| DC Boost | Supported | — |
| Battery Charging | Integrated USB BC1.2 CDP | — |
| CDP Configuration | Pin strap or I²C | — |
| VBUS Supply | Integrated | — |
| Data Path Interchangeability | D1P/M and D2P/M interchangeable | — |
| Host or Device Operation | Host and device agnostic | — |
| Daisy Chain Support | Supported | — |
| Pre-Channel Cable Length | Up to 5 m | — |
| Post-Channel Cable Length | Up to 2 m | — |
| Hộp | 14-pin VQFN (RGY), 3.5 x 3.5 mm | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Product Type | — | USB 2.0 high-speed signal conditioner with DC boost |
| USB Compatibility | — | USB 2.0 |
| OTG Compatibility | — | USB OTG 2.0 |
| Battery Charging Compatibility | — | Battery Charging 1.2 |
| Supply Voltage Range | — | 4.4 V to 5.5 V |
| Supported USB Signaling | — | Low-speed, full-speed, and high-speed |
| Configuration Interface | — | Pin strap or I2C |
| AC Boost Settings | — | 4 selectable settings |
| Maximum Pre-Channel Cable Length | — | 5 m |
| Maximum Post-Channel Cable Length | — | 2 m |
| Daisy-Chain Support | — | Supported |
| D1P/M and D2P/M Support | — | Interchangeable |
| Host and Device Operation | — | Host-agnostic and device-agnostic |
| Package Type | — | 14-pin VQFN (RGY) |
| Package Dimensions | — | 3.5 mm x 3.5 mm |
| REACH Status | — | [DATA_NEEDED: REACH compliance status] |