USB2503A-HZH vs USB2503-HZH Comparaison
Comparaison détaillée côte à côte de USB2503A-HZH par Microchip Technology et USB2503-HZH par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | USB2503A-HZH | USB2503-HZH |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | NRND |
| Product Type | USB 2.0 three-port hub controller | — |
| USB Standard | USB 2.0 | — |
| Downstream Port Count | 3 ports | — |
| Transaction Translators | 3, one per downstream port | 3 (one per port, MultiTRAK) |
| High-Speed Operation | 480 Mb/s | — |
| Full-Speed Operation | 12 Mb/s | — |
| Low-Speed Operation | 1.5 Mb/s | — |
| Tension d'alimentation de fonctionnement | 1.62 V to 3.6 V | — |
| Courant d'alimentation | 100 mA | — |
| Configuration Interface | Serial EEPROM, microcontroller, or pin-selectable options | Pin straps / I2C EEPROM / SMBus |
| Microcontroller Interface | SMBus slave device | — |
| Downstream Power Control | Per-port or ganged, selectable | — |
| Power Source Detection | Bus-powered and self-powered source detection | — |
| Température de fonctionnement | 0 °C to 70 °C | 0 °C to +70 °C |
| Boîtier | 48-QFN-EP, 7 x 7 mm | 48-QFN-EP (7x7 mm, 0.5 mm pitch) |
| Firmware Requirement | No firmware development required | — |
| External Pull-Up Resistors | 10 kΩ recommended on SDA/SMBDATA and SCL/SMBCLK/CFG_SEL0 | — |
| Statut RoHS | Compliant | Compliant |
| Statut du cycle de vie | Active | — |
| Pinout | [DATA_NEEDED: complete 48-pin pin assignments and exposed-pad connection] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum voltage, current, and temperature ratings] | — |
| Maximum USB Operating Current | [DATA_NEEDED: maximum downstream port and total bus current] | — |
| Termination and Decoupling Values | [DATA_NEEDED: USB series termination, crystal, capacitor, and layout values] | — |
| Device Type | — | USB Hub Controller |
| USB Specification | — | USB 2.0 Compliant |
| Number of Downstream Ports | — | 3 |
| Upstream Port Speed | — | High-Speed / Full-Speed / Low-Speed |
| Downstream Port Speed | — | High-Speed (480 Mb/s) / Full-Speed (12 Mb/s) / Low-Speed (1.5 Mb/s) |
| Supply Voltage (Vcc) | — | 3.0 V to 3.6 V |
| Core LDO Output | — | 1.8 V (internal) |
| Type de montage | — | Surface Mount |
| Power Mode | — | Bus-powered or self-powered |
| Overcurrent Detection | — | Per port (external power switch required) |
| Niveau MSL | — | 3 |
| Lead-Free | — | Yes |