USB2503A-HZH vs USB2503-HZH तुलना
विस्तृत दोनों ओर की तुलना USB2503A-HZH द्वारा Microchip Technology और USB2503-HZH द्वारा Microchip Technology. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | USB2503A-HZH | USB2503-HZH |
|---|---|---|
| ब्रांड | Microchip Technology | Microchip Technology |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | NRND |
| Product Type | USB 2.0 three-port hub controller | — |
| USB Standard | USB 2.0 | — |
| Downstream Port Count | 3 ports | — |
| Transaction Translators | 3, one per downstream port | 3 (one per port, MultiTRAK) |
| High-Speed Operation | 480 Mb/s | — |
| Full-Speed Operation | 12 Mb/s | — |
| Low-Speed Operation | 1.5 Mb/s | — |
| ऑपरेटिंग सप्लाई वोल्टेज | 1.62 V to 3.6 V | — |
| सप्लाई करंट | 100 mA | — |
| Configuration Interface | Serial EEPROM, microcontroller, or pin-selectable options | Pin straps / I2C EEPROM / SMBus |
| Microcontroller Interface | SMBus slave device | — |
| Downstream Power Control | Per-port or ganged, selectable | — |
| Power Source Detection | Bus-powered and self-powered source detection | — |
| ऑपरेटिंग तापमान | 0 °C to 70 °C | 0 °C to +70 °C |
| पैकेज | 48-QFN-EP, 7 x 7 mm | 48-QFN-EP (7x7 mm, 0.5 mm pitch) |
| Firmware Requirement | No firmware development required | — |
| External Pull-Up Resistors | 10 kΩ recommended on SDA/SMBDATA and SCL/SMBCLK/CFG_SEL0 | — |
| RoHS स्थिति | Compliant | Compliant |
| लाइफसाइकिल स्थिति | Active | — |
| Pinout | [DATA_NEEDED: complete 48-pin pin assignments and exposed-pad connection] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum voltage, current, and temperature ratings] | — |
| Maximum USB Operating Current | [DATA_NEEDED: maximum downstream port and total bus current] | — |
| Termination and Decoupling Values | [DATA_NEEDED: USB series termination, crystal, capacitor, and layout values] | — |
| Device Type | — | USB Hub Controller |
| USB Specification | — | USB 2.0 Compliant |
| Number of Downstream Ports | — | 3 |
| Upstream Port Speed | — | High-Speed / Full-Speed / Low-Speed |
| Downstream Port Speed | — | High-Speed (480 Mb/s) / Full-Speed (12 Mb/s) / Low-Speed (1.5 Mb/s) |
| Supply Voltage (Vcc) | — | 3.0 V to 3.6 V |
| Core LDO Output | — | 1.8 V (internal) |
| माउंटिंग प्रकार | — | Surface Mount |
| Power Mode | — | Bus-powered or self-powered |
| Overcurrent Detection | — | Per port (external power switch required) |
| MSL स्तर | — | 3 |
| Lead-Free | — | Yes |