USB2507-ADD vs USB2507-ADT Comparaison
Comparaison détaillée côte à côte de USB2507-ADD par Microchip Technology et USB2507-ADT par Microchip Technology. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Microchip Technology
USB2507-ADT USB 2.0 7-Port Hub Controller | Microchip
USB2507-ADT [data_needed: lifecycle status]Comparaison des spécifications
| Paramètre | USB2507-ADD | USB2507-ADT |
|---|---|---|
| Marque | Microchip Technology | Microchip Technology |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Unknown | [DATA NEEDED: Lifecycle Status] |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $0,00 | $0,00 |
| Device Type | Integrated USB 2.0-compatible 7-port hub controller | — |
| USB Compliance | Universal Serial Bus Specification Revision 2.0 | — |
| Downstream Port Count | 7 ports | 7 ports |
| Upstream Host Attachment | Full-speed or full-/high-speed hub | — |
| High-Speed Data Rate | 480 Mb/s | 480 Mbit/s |
| Full-Speed Data Rate | 12 Mb/s | 12 Mbit/s |
| Low-Speed Data Rate | 1.5 Mb/s | 1.5 Mbit/s |
| Transaction Translators | 7 | 7 |
| Configuration Requirement | No firmware development required for standard operation | — |
| Configuration Interfaces | Strapping pins, external EEPROM, microcontroller, SMBus, and serial | — |
| Microcontroller Interface | SMBus slave | — |
| Downstream Power Management | Per-port or ganged, selectable | — |
| Power Source Detection | Bus-powered or self-powered source detection | — |
| Clock Source | On-board 24 MHz crystal driver or 24 MHz external clock | — |
| Internal PLL | 480 MHz USB 2.0 sampling | — |
| Integrated Regulator | 1.8 V linear voltage regulator | — |
| Integrated USB Components | Termination and pull-up/pull-down resistors | USB termination and pull-up/pull-down resistors |
| Differential Pin Protection | Internal short-circuit protection | — |
| Core Voltage | 1.8 V low-power core | — |
| Boîtier | 80-TQFP, 12 x 12 mm | 80-pin TQFP, 12 x 12 mm |
| Type de montage | Surface mount | Surface mount |
| Product Type | — | Integrated USB 2.0-compatible 7-port hub controller |
| USB Specification Compatibility | — | USB 2.0 |
| Clocking | — | On-board 24 MHz crystal driver circuit or 24 MHz external clock driver |
| High-Speed Sampling Architecture | — | Internal PLL for 480 Mbit/s USB 2.0 sampling |
| Internal Supply | — | Internal 1.8 V linear voltage regulator |
| Configuration Methods | — | Strapping options, external EEPROM, or microcontroller interface |
| Power Management | — | Per-port or ganged selectable power control |
| Power-Source Detection | — | Bus-powered and self-powered source detection |
| Differential-Pin Protection | — | Internal short-circuit protection |
| Firmware Requirement | — | No firmware development required |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |