USB2507-ADD vs USB2507-ADT 对比
详细并排对比 USB2507-ADD 出自 Microchip Technology 和 USB2507-ADT 出自 Microchip Technology。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Microchip Technology
USB2507-ADT USB 2.0 7-Port Hub Controller | Microchip
USB2507-ADT [data_needed: lifecycle status]规格对比
| 参数 | USB2507-ADD | USB2507-ADT |
|---|---|---|
| 品牌 | Microchip Technology | Microchip Technology |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | Unknown | [DATA NEEDED: Lifecycle Status] |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $0.00 | $0.00 |
| Device Type | Integrated USB 2.0-compatible 7-port hub controller | — |
| USB Compliance | Universal Serial Bus Specification Revision 2.0 | — |
| Downstream Port Count | 7 ports | 7 ports |
| Upstream Host Attachment | Full-speed or full-/high-speed hub | — |
| High-Speed Data Rate | 480 Mb/s | 480 Mbit/s |
| Full-Speed Data Rate | 12 Mb/s | 12 Mbit/s |
| Low-Speed Data Rate | 1.5 Mb/s | 1.5 Mbit/s |
| Transaction Translators | 7 | 7 |
| Configuration Requirement | No firmware development required for standard operation | — |
| Configuration Interfaces | Strapping pins, external EEPROM, microcontroller, SMBus, and serial | — |
| Microcontroller Interface | SMBus slave | — |
| Downstream Power Management | Per-port or ganged, selectable | — |
| Power Source Detection | Bus-powered or self-powered source detection | — |
| Clock Source | On-board 24 MHz crystal driver or 24 MHz external clock | — |
| Internal PLL | 480 MHz USB 2.0 sampling | — |
| Integrated Regulator | 1.8 V linear voltage regulator | — |
| Integrated USB Components | Termination and pull-up/pull-down resistors | USB termination and pull-up/pull-down resistors |
| Differential Pin Protection | Internal short-circuit protection | — |
| Core Voltage | 1.8 V low-power core | — |
| 封装 | 80-TQFP, 12 x 12 mm | 80-pin TQFP, 12 x 12 mm |
| 安装类型 | Surface mount | Surface mount |
| Product Type | — | Integrated USB 2.0-compatible 7-port hub controller |
| USB Specification Compatibility | — | USB 2.0 |
| Clocking | — | On-board 24 MHz crystal driver circuit or 24 MHz external clock driver |
| High-Speed Sampling Architecture | — | Internal PLL for 480 Mbit/s USB 2.0 sampling |
| Internal Supply | — | Internal 1.8 V linear voltage regulator |
| Configuration Methods | — | Strapping options, external EEPROM, or microcontroller interface |
| Power Management | — | Per-port or ganged selectable power control |
| Power-Source Detection | — | Bus-powered and self-powered source detection |
| Differential-Pin Protection | — | Internal short-circuit protection |
| Firmware Requirement | — | No firmware development required |
| RoHS 状态 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Status | — | [DATA_NEEDED: AEC-Q100 qualification status] |