VNI4140KTR-32 vs VNI4140K-32 Comparaison
Comparaison détaillée côte à côte de VNI4140KTR-32 par STMicroelectronics et VNI4140K-32 par STMicroelectronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
VNI4140KTR-32 - Quad 1A High-Side SSR, 41V, PowerSSO-24 | STMicroelectronics
VNI4140KTR-32 ✓ ActifSTMicroelectronics
VNI4140K-32 - Quad High-Side Smart Power SSR 1A PowerSSO-24 | STMicroelectronics
VNI4140K-32 ✓ ActifComparaison des spécifications
| Paramètre | VNI4140KTR-32 | VNI4140K-32 |
|---|---|---|
| Marque | STMicroelectronics | STMicroelectronics |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,10 | $2,05 |
| Device Type | Quad High-Side Smart Power Solid State Relay | Quad high-side smart power solid-state relay |
| Number of Channels | 4 | 4 |
| Topologie | High-Side Switch, N-Channel MOSFET | High-side switch (N-channel MOSFET) |
| Supply Voltage Range | 10.5 V to 36 V | — |
| Maximum Operating Supply | 41 V | — |
| On-Resistance R_DS(on) (typ) | 0.08 ohm per channel | — |
| Continuous Output Current per Channel | 1 A | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | — |
| Boîtier | PowerSSO-24 (Exposed Bottom Pad) | PowerSSO-24 (24-pin with exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Lead-Free / RoHS | Yes / Compliant | — |
| Integrated Protections | Overcurrent, Short-Circuit, Over-Temperature, Under-Voltage Lockout | — |
| Diagnostic Output | Yes (per-channel open-load, fault, thermal) | — |
| Charge Pump | Yes (integrated, for gate drive) | — |
| Fast Demagnetization of Inductive Loads | Yes (internal) | — |
| Conformance | IEC 61131-2 (industrial PLC outputs); ESD IEC ±25 kV | — |
| Niveau MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Load Current per Channel | — | 1.0 A (continuous) |
| On-State Resistance (RDS(on)) | — | 0.08 ohm per channel |
| Supply Voltage (VCC) Max | — | 41 V |
| Configuration de sortie | — | 1:1 N-Channel |
| Nombre de sorties | — | 4 |
| Diagnostics | — | Per-channel open-load, short-to-ground, thermal fault |
| Inductive Load Handling | — | Fast demagnetization (integrated) |
| Logic Input Compatibility | — | CMOS/TTL compatible logic inputs |
| Package Width | — | 7.50 mm (approximately 0.295 inch) |
| Industrial Standard Compliance | — | IEC 61131-2 |
| ESD Rating | — | 25 kV (per IEC standard, air discharge) |
| Technology | — | ST VIPower (vertical DMOS + CMOS/bipolar control) |