VNI4140KTR-32 vs VNI4140K-32 比較

詳細な並列比較: VNI4140KTR-32 メーカー: STMicroelectronics および VNI4140K-32 メーカー: STMicroelectronics。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。

仕様比較

パラメータ VNI4140KTR-32 VNI4140K-32
ブランド STMicroelectronics STMicroelectronics
カテゴリ Power MOSFET Drivers Power MOSFET Drivers
ライフサイクル状態 有効 有効
在庫状況 In Stock In Stock
単価(USD) $4.10 $2.05
Device Type Quad High-Side Smart Power Solid State Relay Quad high-side smart power solid-state relay
Number of Channels 4 4
トポロジー High-Side Switch, N-Channel MOSFET High-side switch (N-channel MOSFET)
Supply Voltage Range 10.5 V to 36 V —
Maximum Operating Supply 41 V —
On-Resistance R_DS(on) (typ) 0.08 ohm per channel —
Continuous Output Current per Channel 1 A —
動作温度範囲 -40 °C to +125 °C —
パッケージ PowerSSO-24 (Exposed Bottom Pad) PowerSSO-24 (24-pin with exposed thermal pad)
実装タイプ Surface Mount Surface Mount
Lead-Free / RoHS Yes / Compliant —
Integrated Protections Overcurrent, Short-Circuit, Over-Temperature, Under-Voltage Lockout —
Diagnostic Output Yes (per-channel open-load, fault, thermal) —
Charge Pump Yes (integrated, for gate drive) —
Fast Demagnetization of Inductive Loads Yes (internal) —
Conformance IEC 61131-2 (industrial PLC outputs); ESD IEC ±25 kV —
MSLレベル [DATA_NEEDED: MSL rating per JEDEC J-STD-020] —
Load Current per Channel — 1.0 A (continuous)
On-State Resistance (RDS(on)) — 0.08 ohm per channel
Supply Voltage (VCC) Max — 41 V
出力構成 — 1:1 N-Channel
出力数 — 4
Diagnostics — Per-channel open-load, short-to-ground, thermal fault
Inductive Load Handling — Fast demagnetization (integrated)
Logic Input Compatibility — CMOS/TTL compatible logic inputs
Package Width — 7.50 mm (approximately 0.295 inch)
Industrial Standard Compliance — IEC 61131-2
ESD Rating — 25 kV (per IEC standard, air discharge)
Technology — ST VIPower (vertical DMOS + CMOS/bipolar control)

データシート&リソース

すべての製品を閲覧 BOMを作成 見積もり依頼