5M80ZT100C5N - MAX V 80LE CPLD, 64 Macrocells, TQFP-100 | Intel
Référence : 5M80ZT100C5N ✓ Actif| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $6.5 | $6,50 |
| 10 | $5.85 | $58,50 |
| 100 | $5.2 | $520,00 |
| 500 | $4.65 | $2 325,00 |
| 1 000 | $4.1 | $4 100,00 |
5M80ZT100C5N Présentation
A CPLD (Complex Programmable Logic Device) is a non-volatile programmable logic device that provides instant-on deterministic logic with predictable timing, sitting hierarchically between simple PAL/GAL devices and higher-density FPGAs in the programmable logic taxonomy. CPLDs are commonly used as interface bridges, configuration managers, and peripheral decoders where low standby power, fast I/O response, and high drive strength are required. The MAX V family specifically targets low quiescent current (typically 25 uA standby) and 1.8 V core operation with multi-voltage I/O support.
Key specifications include an industrial operating range of 0C to +85C, in-system programmability via JTAG, support for hot-socketing and power sequencing, and operation from a single 1.71-1.89 V core supply with I/O banks tolerant of 1.2 V through 3.3 V LVCMOS/LVTTL. The device uses a flash-based configuration cell that retains programming without external memory, eliminating boot-time delays.
Architecturally, the 5M80ZT100C5N uses a Logic Array Block (LAB) of 16 macrocells combined with a global interconnect matrix, providing fast propagation delays and deterministic timing for glue-logic functions. The 100-pin TQFP footprints are pin-compatible across the MAX V family densities (5M40Z/5M80Z/5M160Z/5M240Z/5M570Z), enabling upward migration without PCB rework.
Typical applications include I/O expansion and level translation in industrial control boards, bus bridges between microcontrollers and legacy peripherals, power-up and reset sequencing in multi-rail systems, LED display driving, and PAL/GAL replacements where deterministic timing and non-volatility are critical. Designers migrating from discrete 74-series glue logic frequently adopt the 5M80ZT100C5N to consolidate multiple small-scale logic functions into a single programmable device.
When designing with this device, ensure the JTAG chain matches the Quartus Prime programmer expectations and provide proper decoupling on each VCCIO bank. Designers should also confirm that the design's I/O voltage is supported by the bank's VCCIO and use the Quartus II / Quartus Prime MAX V device support file to program the device via JTAG or ByteBlaster.
This page synthesizes distributor stock levels, drop-in compatible same-package alternatives, and practical design notes not found in the manufacturer datasheet - enabling engineers to select and source the 5M80ZT100C5N with confidence.
Alternatives de remplacement direct pour 5M80ZT100C5N — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec 5M80ZT100C5N (même facteur de forme et même empreinte) — différant par Package, Configuration Memory, RoHS Status, Programming Interface, Macrocells.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
5M160ZT100C5N
✅ Remplacement direct✓ En stock
$4.75 / unité
Voir la fiche technique →5M40ZT100C5N
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
5M240ZT100C5N
✅ Remplacement direct✓ En stock
$4.9816 / unité
Voir la fiche technique →5M570ZT100C5N
✅ Remplacement direct✓ En stock
$3.7 / unité
Voir la fiche technique →5M80ZT100C4N
✅ Remplacement direct✓ En stock
$5.45 / unité
Voir la fiche technique →5M80ZT100A5N
✅ Remplacement direct✓ En stock
$1.85 / unité
Voir la fiche technique →5M80ZT100C5N Valeurs maximales et caractéristiques électriques
| Manufacturer | Intel (formerly Altera) |
| Series | MAX V |
| Device Type | CPLD (Complex Programmable Logic Device) |
| Logic Elements | 80 |
| Macrocells | 64 |
| Pin-to-Pin Delay (tPD) | 7.5 ns |
| User I/Os | 79 |
| User Flash Memory | 8 Kbits |
| Package Type | 100-pin TQFP (T100) |
| Type de montage | Surface Mount |
| Température de fonctionnement | 0C to +85C (commercial) |
| Core Voltage | 1.71 V to 1.89 V |
| I/O Voltage (VCCIO) | 1.2 V to 3.3 V LVCMOS/LVTTL |
| Programming Interface | JTAG (IEEE 1149.1) |
| Configuration Memory | Non-volatile Flash |
| Statut RoHS | Compliant |
| Lead-Free | Yes |
Guide de configuration des broches du 5M80ZT100C5N 100-pin tqfp (t100)
Configuration des broches du 5M80ZT100C5N (boîtier 100-pin tqfp (t100)). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour 5M80ZT100C5N.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
5M80ZT100C5N convient pour 6 applications: Industrial PLC I/O Expansion, Bus Bridge Between MCU and Legacy Peripherals, Power-Up and Reset Sequencing Logic, LED Display Driver and Multiplexer, PAL/GAL Replacement for Legacy Designs, Portable and Battery-Powered Devices.
Industrial PLC I/O Expansion
The 5M80ZT100C5N is well-suited for industrial PLC I/O expansion where 79 user I/Os across four I/O banks can be configured as inputs, outputs, or bidirectional signals to supplement a microcontroller's native ports. Each I/O bank supports an independent VCCIO from 1.2 V to 3.3 V, allowing direct interface to 1.8 V sensors, 3.3 V MCUs, and 5 V-tolerant legacy peripherals. The 7.5 ns pin-to-pin delay provides deterministic timing for high-speed control loops, while the 80-logic-element capacity is sufficient to implement multiple decoder, mux, and flip-flop functions in a single device, reducing PCB area versus discrete 74HC logic. Quartus Prime software allows in-system JTAG reprogramming for late-stage design changes during PLC commissioning.
Recommandé
Bus Bridge Between MCU and Legacy Peripherals
The 5M80ZT100C5N excels as a bus bridge between modern microcontrollers and legacy peripherals operating at different voltage levels or bus widths. With 64 macrocells, it can implement address/data multiplexers, chip-select decoders, and wait-state generators to glue a 32-bit ARM Cortex-M4 MCU to a 16-bit SRAM or an 8-bit parallel ADC. The 8 Kbits of user flash memory can store configuration parameters or look-up tables for protocol conversion. The MAX V's 7.5 ns tPD provides sub-15 ns bus turn-around, suitable for asynchronous SRAM and NOR-flash interfaces up to 66 MHz. Hot-socketing capability allows insertion into live backplanes without latch-up or signal contention.
Recommandé
Power-Up and Reset Sequencing Logic
The 5M80ZT100C5N is ideal for power-up and reset sequencing in multi-rail systems requiring deterministic timing. With 80 logic elements, the CPLD can implement multi-channel sequencers with adjustable delays for each rail enable, programmable watchdog timers, and voltage-fault interlocks. The non-volatile flash configuration ensures the device boots instantly at power-on with its sequencing state machine already active - no boot ROM delay. Each I/O bank can drive enable signals at the appropriate rail voltage (1.8 V, 2.5 V, 3.3 V), and the 7.5 ns propagation delay allows fine-grained sequencing in high-speed FPGA-based designs. JTAG in-system programmability enables field firmware updates.
Recommandé
LED Display Driver and Multiplexer
The 5M80ZT100C5N can drive multi-digit 7-segment or dot-matrix LED displays with row/column multiplexing, freeing the host MCU for higher-level tasks. With 79 user I/Os and 64 macrocells, the device can directly multiplex up to 8 digits with refresh logic, brightness PWM control, and character decoding on-chip. The 1.8 V core combined with 3.3 V-tolerant I/O allows the CPLD to operate directly from low-voltage rails while driving LED segments through external transistors. The flash-based configuration retains display patterns and font tables even when the system is powered down, supporting instant-on indicator applications in industrial and instrumentation equipment.
Recommandé
PAL/GAL Replacement for Legacy Designs
The 5M80ZT100C5N is a drop-in replacement for legacy PAL (Programmable Array Logic) and GAL (Generic Array Logic) devices in industrial systems where the original logic parts have become obsolete or expensive. With 64 macrocells and 8 Kbits of user flash, the MAX V can replicate multiple small PAL devices in a single chip, often reducing the BOM from 3-5 legacy parts to one CPLD. The 100-pin TQFP footprint provides more I/Os than typical 20- or 24-pin PALs, giving designers headroom to add new functions while preserving existing logic. The 7.5 ns tPD matches the response time of common 7-10 ns PALs, ensuring timing compatibility with downstream circuitry.
Recommandé
Portable and Battery-Powered Devices
The 5M80ZT100C5N suits portable and battery-powered devices thanks to its low standby current (typically 25 uA) and 1.8 V core voltage, which minimizes quiescent power consumption. The non-volatile flash configuration eliminates boot-time delays and external boot ROM, reducing both BOM cost and standby power. With 79 user I/Os, the CPLD can implement wake-up logic, button debouncing, peripheral gating, and low-battery indicator sequencing all in one device. The commercial 0C to +85C temperature range covers most consumer and portable equipment, and the JTAG interface supports in-system firmware updates for design iteration during product development.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour 5M80ZT100C5N — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | 5M160ZT100C5N | 5M40ZT100C5N | 5M240ZT100C5N | 5M570ZT100C5N | 5M80ZT100C4N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | TQFP-100 | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same | TQFP-100 - same |
| Logic Elements | 80 | 160 | 40 | 240 | 570 | 80 |
| Macrocells | 64 | 128 | 32 | 192 | 440 | 64 |
| User I/Os | 79 | 79 | 79 | 79 | 79 | 79 |
| Operating Temperature | 0C to +85C (commercial) | 0C to +85C | 0C to +85C | 0C to +85C | 0C to +85C | 0C to +85C |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| I/O Voltage Range | 1.2 V to 3.3 V | 1.2 V to 3.3 V | 1.2 V to 3.3 V | 1.2 V to 3.3 V | 1.2 V to 3.3 V | 1.2 V to 3.3 V |
| User Flash Memory | 8 Kbits | 8 Kbits | 8 Kbits | 8 Kbits | 8 Kbits | 8 Kbits |
Principaux différenciateurs
- Largest pin-compatible MAX V CPLD for vertical migration headroom (vs 5M160ZT100C5N)
- Optimized 80 LE for cost-sensitive glue-logic applications (vs 5M40ZT100C5N)
- Non-volatile flash configuration enables instant-on operation (vs FPGA-based designs)
Notes de conception
Each of the four I/O banks on the 5M80ZT100C5N must be supplied by an independent VCCIO pin set, even if the voltage matches an adjacent bank. Decouple each VCCIO pin with a 0.1 uF ceramic capacitor placed within 5 mm of the pin, and provide one 10 uF bulk capacitor per rail. The 1.8 V VCCINT rail should also have a dedicated 0.1 uF + 10 uF decoupling network. Designers must power up the 1.8 V core before the I/O banks to avoid latch-up, or use the MAX V's built-in power-on-reset (POR) circuitry to sequence correctly. Estimated core current draw at 50 MHz operation is approximately 25-40 mA depending on logic utilization.
Place JTAG pins (TDI, TDO, TMS, TCK) accessible at a header or test point for in-system programming and boundary-scan testing. Keep the JTAG trace length under 100 mm and avoid stubs. The 100-pin TQFP package has a 0.5 mm pitch - use 0.2 mm trace/space design rules and ensure the PCB has a continuous ground plane beneath the device for signal return paths. Add a 4.7 kohm pull-up resistor on TCK if the JTAG chain is unused during normal operation, per IEEE 1149.1 recommendations.
Do not confuse the 'C5N' commercial temperature grade with 'I5N' industrial grade - the C5N variant is only rated 0C to +85C and may fail in outdoor or automotive applications. Avoid leaving unused I/O pins floating; configure them as outputs driving low or inputs with internal pull-ups enabled, or assign them explicitly in the Quartus Pin Planner to avoid floating-pin failures. The 5M80ZT100C5N's flash memory has a finite program/erase cycle count - design field firmware updates to minimize unnecessary JTAG reprogramming cycles.
Informations de conformité
RoHS and lead-free compliant per distributor product pages (DigiKey 544-2718-ND). Not AEC-Q100 qualified in C5N grade - choose 5M80ZT100A5N automotive variant for AEC-Q100 applications. Halogen-free status not explicitly stated in available data.