A3P060-TQ144I - 60K Gate FPGA | Microchip Technology
Référence : A3P060-TQ144I ✗ Fin de vieA3P060-TQ144I Présentation
A ProASIC3 FPGA is a reprogrammable digital semiconductor in the field-programmable gate array hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic functions, interfaces, and signal processing to be implemented through configuration rather than mask changes. The A3P060 belongs to the low-density ProASIC3 family, positioned for compact control, interface, communications, and embedded-processing systems where moderate logic capacity and a large I/O count are more important than very high performance.
The device offers approximately 60K equivalent gates, 1,536 logic cells, and 91 user I/O. A listed maximum operating frequency of 231 MHz supports moderately clocked digital systems, while 130 nm CMOS fabrication provides a useful balance of density, cost, and power. Its 144-pin TQFP/LQFP package exposes substantially more I/O than the smaller package options in the A3P060 family and supports board-level integration without a ball-grid array.
Configuration flash is integrated with the FPGA architecture, allowing designs to be programmed and reprogrammed rather than permanently masked. The architecture is suited to parallel logic, state machines, bus interfaces, communication control, and small embedded datapaths. Its 91 available I/O can be allocated according to the selected device pinout and board requirements, making signal planning and power distribution important parts of the design process.
Typical uses include industrial automation, test and measurement equipment, communications interfaces, embedded control, data acquisition, and compact embedded systems. The 144-lead package is particularly useful when a design requires numerous external connections while retaining a conventional, inspectable surface-mount footprint suitable for prototype assembly and production test.
Power and signal-integrity design should follow the manufacturer's recommended core, I/O, and configuration rails. Confirm the selected I/O standard, voltage tolerances, decoupling requirements, and clock topology against the A3P060 documentation before layout. A conservative approach is to place bypass capacitors directly at the supply pins and keep high-speed clock and configuration routes short, continuous, and separated from noisy switching nodes.
This product page combines the verified device specifications, package and temperature information, procurement paths, drop-in alternatives, comparison parameters, and application-oriented design guidance. These details help engineers evaluate whether the 60K-gate A3P060-TQ144I fits an existing 144-lead board before committing to programming and layout work.
Alternatives de remplacement direct pour A3P060-TQ144I — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec A3P060-TQ144I (même facteur de forme et même empreinte) — différant par Core Supply Voltage.
A3P060-TQG144I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P060-TQ144
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P060-TQG144
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P060-1TQ144
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P060-TQ144IY
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P060-TQ144I Valeurs maximales et caractéristiques électriques
| Device Type | ProASIC3 Field Programmable Gate Array |
| Equivalent Gates | 60,000 gates |
| Configurable Logic Blocks | 1,536 CLBs |
| User I/O | 91 I/O |
| Maximum Listed Frequency | 231 MHz |
| Core Supply Voltage | 1.5 V nominal |
| Process Technology | 130 nm CMOS |
| Boîtier | 144-lead TQFP/LQFP |
| Lead Count | 144 leads |
| Plage de température de fonctionnement | -40 °C to +85 °C |
| Packing Media | Tray |
| Configuration Memory | On-chip configuration flash |
| Logic Density Class | Low-density FPGA |
Guide de configuration des broches du A3P060-TQ144I 144-lead tqfp/lqfp
Configuration des broches du A3P060-TQ144I (boîtier 144-lead tqfp/lqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour A3P060-TQ144I.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
A3P060-TQ144I convient pour 6 applications: Industrial Automation and PLC Control, Communications Interface and Protocol Bridge, Data Acquisition and Instrumentation, Test and Measurement Equipment, Embedded Control and Soft Processor, Security, Surveillance, and Control Panels.
Industrial Automation and PLC Control
The A3P060-TQ144I fits compact industrial controllers that require sequencing, interlocks, signal routing, and communication interfaces. Its 1,536 configurable logic blocks and 91 user I/O provide room for parallel control logic while the 144-lead package simplifies access to external sensors and actuators. The 231 MHz listed performance supports moderately clocked control planes, and the -40 °C to +85 °C range covers typical factory-floor ambient conditions. On-chip configuration flash also permits repeatable field updates without external programming hardware.
Recommandé
Communications Interface and Protocol Bridge
The A3P060-TQ144I can implement protocol converters, UART, SPI, parallel-to-serial interfaces, and test-control logic with 60,000 equivalent gates and a 231 MHz listed system frequency. Its 91 user I/O are useful when a design must connect several buses, status signals, and data channels without an external CPLD. The 144-lead TQFP/LQFP package provides a conventional surface-mount assembly format and enough routing flexibility for a board with moderate signal density.
Recommandé
Data Acquisition and Instrumentation
The A3P060-TQ144I suits data-acquisition front ends requiring acquisition control, counters, filtering, digital calibration, and host-interface logic. The 91 user I/O can accommodate digital sensors, trigger signals, status indicators, and parallel data paths, while the 60,000-gate ProASIC3 architecture accommodates reusable control modules. A 231 MHz listed frequency supports demanding clocked logic, and the 144-lead package is practical for instrument front-end boards requiring a moderate number of external connections.
Recommandé
Test and Measurement Equipment
The A3P060-TQ144I is appropriate for programmable test systems, pattern generation, timing control, instrument interfacing, and automated measurement sequencing. Its 1,536 configurable logic blocks can run multiple counters, state machines, and acquisition pipelines, while 91 I/O provide connections to test fixtures and control buses. The 231 MHz listed frequency and integrated configuration flash support repeatable test setups, and the -40 °C to +85 °C range covers many laboratory and industrial test environments.
Recommandé
Embedded Control and Soft Processor
The ProASIC3 architecture supports optional Soft ARM capabilities, making the A3P060-TQ144I useful for small embedded-control platforms that need programmable logic beside a soft processor. The 60,000 equivalent gates can divide between bus logic, peripherals, interrupts, and application-specific datapaths, while 91 I/O support external memory and peripherals. The 144-lead package gives designers more I/O than smaller ProASIC3 options, although resource sharing and timing closure must be checked against the selected configuration.
Recommandé
Security, Surveillance, and Control Panels
The A3P060-TQ144I can coordinate alarm inputs, zone monitoring, relay outputs, event logging, and communications in compact security systems. Its 91 user I/O allow numerous discrete sensors and indicators to be connected directly, while 1,536 logic blocks can implement debouncing, state management, timing, and protocol handling. The 231 MHz listed performance exceeds the needs of many supervisory control functions, and the -40 °C to +85 °C range supports equipment deployed in controlled indoor or industrial environments.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour A3P060-TQ144I — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | A3P060-TQG144I | A3P060-TQ144 | A3P060-TQG144 | A3P060-1TQ144 | A3P060-TQ144IY |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Device Type | ProASIC3 FPGA | ProASIC3 FPGA | ProASIC3 FPGA | ProASIC3 FPGA | ProASIC3 FPGA | ProASIC3 FPGA |
| Equivalent Gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates | 60,000 gates |
Principaux différenciateurs
- Matches the listed density and speed of the closest ProASIC3 board option (vs A3P060-TQG144I)
- Broader upper-temperature option is available for harsher environments (vs A3P060-TQ144IY)
- Explicit industrial temperature specification (vs A3P060-TQG144)
- Substantial I/O availability for interface-heavy boards (vs A3P060-1TQ144)
Notes de conception
Plan the A3P060-TQ144I power tree around its nominal 1.5 V core rail and the separate I/O requirements defined in the manufacturer documentation. Place the required bypass capacitors at the associated supply pins with short return paths, and verify startup sequencing if core and I/O rails are enabled separately. Estimated power dissipation should be calculated from the actual core voltage, I/O activity, and FPGA utilization rather than from the nominal supply voltage alone.
Use the official 144-lead package drawing and pin-description table before routing the board. Keep configuration pins, clock inputs, dedicated pins, and user I/O assignments consistent with the compiled design, and preserve the exposed pad requirements if the selected package drawing includes one. Route clocks as short, continuous paths on a stable reference plane and avoid creating stubs when attaching external test equipment.
Assign I/O standards only after reviewing the bank voltage and pin constraints in the A3P060 documentation. Series damping may be necessary for fast or lightly loaded outputs, while input buffers should receive short routes and appropriate return paths. Do not assume that a logic-level interface is 3.3 V tolerant; verify the selected I/O bank, transition limits, and external driver amplitude against the datasheet.
A common error is treating A3P060-TQ144, A3P060-TQG144I, A3P060-1TQ144, and A3P060-TQ144IY as equivalent ordering codes. The G, I, Y, and -1 fields can identify lead-free, temperature, and speed conditions. Compare each full MPN against the approved BOM before substituting a part, especially when the system operates above +85 °C or depends on a particular timing grade.
Informations de conformité
The A3P060-TQG144I listing is identified as lead-free, but the exact compliance status of A3P060-TQ144I requires confirmation from its ordering documentation. No AEC-Q100 qualification is stated for the target.