Microchip Technology

A3P060-TQ144I - 60K Gate FPGA | Microchip Technology

MPN: A3P060-TQ144I ✗ اختتامِ زندگی
1.5 V nominal Vdss 144-lead TQFP/LQFP Package 231 MHz Speed On-chip configuration flash Memory
MOQ: 1 |

A3P060-TQ144I جائزہ

The Microchip Technology A3P060-TQ144I is a ProASIC3 field-programmable gate array with 60,000 equivalent logic gates, 1,536 configurable logic blocks, and a listed system frequency of 231 MHz. It is packaged as a 144-lead TQFP/LQFP device with 91 user I/O and operates from a nominal 1.5 V core supply. The device is based on 130 nm CMOS technology and combines programmable logic, embedded block RAM, dedicated I/O resources, and on-chip configuration support.

A ProASIC3 FPGA is a reprogrammable digital semiconductor in the field-programmable gate array hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows logic functions, interfaces, and signal processing to be implemented through configuration rather than mask changes. The A3P060 belongs to the low-density ProASIC3 family, positioned for compact control, interface, communications, and embedded-processing systems where moderate logic capacity and a large I/O count are more important than very high performance.

The device offers approximately 60K equivalent gates, 1,536 logic cells, and 91 user I/O. A listed maximum operating frequency of 231 MHz supports moderately clocked digital systems, while 130 nm CMOS fabrication provides a useful balance of density, cost, and power. Its 144-pin TQFP/LQFP package exposes substantially more I/O than the smaller package options in the A3P060 family and supports board-level integration without a ball-grid array.

Configuration flash is integrated with the FPGA architecture, allowing designs to be programmed and reprogrammed rather than permanently masked. The architecture is suited to parallel logic, state machines, bus interfaces, communication control, and small embedded datapaths. Its 91 available I/O can be allocated according to the selected device pinout and board requirements, making signal planning and power distribution important parts of the design process.

Typical uses include industrial automation, test and measurement equipment, communications interfaces, embedded control, data acquisition, and compact embedded systems. The 144-lead package is particularly useful when a design requires numerous external connections while retaining a conventional, inspectable surface-mount footprint suitable for prototype assembly and production test.

Power and signal-integrity design should follow the manufacturer's recommended core, I/O, and configuration rails. Confirm the selected I/O standard, voltage tolerances, decoupling requirements, and clock topology against the A3P060 documentation before layout. A conservative approach is to place bypass capacitors directly at the supply pins and keep high-speed clock and configuration routes short, continuous, and separated from noisy switching nodes.

This product page combines the verified device specifications, package and temperature information, procurement paths, drop-in alternatives, comparison parameters, and application-oriented design guidance. These details help engineers evaluate whether the 60K-gate A3P060-TQ144I fits an existing 144-lead board before committing to programming and layout work.

کے لیے ڈراپ اِن متبادل A3P060-TQ144I — یکساں پیکیج، پن سے پن مطابقت پذیر۔ مختلف پیکیج والے پرزے جن کے لیے PCB دوبارہ کام درکار ہو، شامل نہیں ہیں۔

اس سیریز میں مختلف ورژن

اسی سیریز کے ماڈلز جو ڈراپ اِن مطابقت رکھتے ہیں A3P060-TQ144I (یکساں فارم فیکٹر اور فٹ پرنٹ) — میں مختلف Core Supply Voltage.

Microchip Technology
Core Supply Voltage: 1.5 V
موازنہ کریں A3P060-TQ144I →

A3P060-TQG144I

✅ ڈراپ-اِن
📦 TQFP-144
Same listed 60,000 gates, 91 I/O, and 231 MHz performance; the G ordering suffix differs by 0 MHz and requires suffix-specific RoHS qualification review.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

A3P060-TQ144

✅ ڈراپ-اِن
Microchip Technology
📦 TQFP-144
ProASIC3 · Flash-based · 60,000 gates · 91 pins · 18,432 bits · CMOS · 1.5 V · 0°C to 70°C (32°F to 158°F)

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

A3P060-TQG144

✅ ڈراپ-اِن
📦 TQFP-144
Same 144-lead ProASIC3 device family and 60,000-gate density; the G suffix is retained while the I industrial-temperature suffix is removed, with a potential 0 °C difference at the -40 °C lower limit and confirmation required at +85 °C.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

A3P060-1TQ144

✅ ڈراپ-اِن
Microchip Technology
📦 TQFP-144
ProASIC3 field-programmable gate array (FPGA) · 60000 gates · 1536 CLBs · 18432 bits · 91 I/O · 272 MHz · 1.5 V · 130 nm CMOS

قیمت کے لیے رابطہ کریں

ڈیٹا شیٹ دیکھیں →

A3P060-TQ144IY

✅ ڈراپ-اِن
📦 TQFP-144
Same 60,000-gate ProASIC3 architecture and 144-lead package; the Y grade extends the listed upper operating temperature from +85 °C to +100 °C, a 15 °C improvement.

📋 حوالہ جاتی متبادل (کیٹلاگ میں نہیں)

A3P060-TQ144I زیادہ سے زیادہ ریٹنگز اور برقی خصوصیات

Device Type ProASIC3 Field Programmable Gate Array
Equivalent Gates 60,000 gates
Configurable Logic Blocks 1,536 CLBs
User I/O 91 I/O
Maximum Listed Frequency 231 MHz
Core Supply Voltage 1.5 V nominal
Process Technology 130 nm CMOS
پیکیج 144-lead TQFP/LQFP
Lead Count 144 leads
آپریٹنگ درجہ حرارت رینج -40 °C to +85 °C
Packing Media Tray
Configuration Memory On-chip configuration flash
Logic Density Class Low-density FPGA

A3P060-TQ144I 144-lead tqfp/lqfp پن کنفیگریشن گائیڈ

A3P060-TQ144I (144-lead tqfp/lqfp پیکیج) کے لیے پن کنفیگریشن۔ اس ڈیجیٹل IC میں GPIO، کمیونیکیشن انٹرفیس (UART، SPI، I2C) اور پاور پنز شامل ہیں۔ متبادل پن فنکشنز اور کنفیگریشن آپشنز کے لیے مینوفیکچرر کے ڈیٹا شیٹ سے رجوع کریں۔ ایمبیڈڈ سسٹم ڈیزائن اور PCB لے آؤٹ کے لیے ضروری۔

A3P060-TQ144I کے لیے 144-lead tqfp/lqfp پیکیج پن آؤٹ ڈایاگرام

کے لیے تفصیلی پن آؤٹ ڈیٹا دستیاب نہیں A3P060-TQ144I.

رجوع کریں ڈیٹا شیٹ مکمل پن کنفیگریشن کے لیے۔

عام استعمالات

A3P060-TQ144I کے لیے موزوں ہے 6 ایپلیکیشنs: Industrial Automation and PLC Control, Communications Interface and Protocol Bridge, Data Acquisition and Instrumentation, Test and Measurement Equipment, Embedded Control and Soft Processor, Security, Surveillance, and Control Panels.

🏭

Industrial Automation and PLC Control

The A3P060-TQ144I fits compact industrial controllers that require sequencing, interlocks, signal routing, and communication interfaces. Its 1,536 configurable logic blocks and 91 user I/O provide room for parallel control logic while the 144-lead package simplifies access to external sensors and actuators. The 231 MHz listed performance supports moderately clocked control planes, and the -40 °C to +85 °C range covers typical factory-floor ambient conditions. On-chip configuration flash also permits repeatable field updates without external programming hardware.

🌐

Communications Interface and Protocol Bridge

The A3P060-TQ144I can implement protocol converters, UART, SPI, parallel-to-serial interfaces, and test-control logic with 60,000 equivalent gates and a 231 MHz listed system frequency. Its 91 user I/O are useful when a design must connect several buses, status signals, and data channels without an external CPLD. The 144-lead TQFP/LQFP package provides a conventional surface-mount assembly format and enough routing flexibility for a board with moderate signal density.

📺

Data Acquisition and Instrumentation

The A3P060-TQ144I suits data-acquisition front ends requiring acquisition control, counters, filtering, digital calibration, and host-interface logic. The 91 user I/O can accommodate digital sensors, trigger signals, status indicators, and parallel data paths, while the 60,000-gate ProASIC3 architecture accommodates reusable control modules. A 231 MHz listed frequency supports demanding clocked logic, and the 144-lead package is practical for instrument front-end boards requiring a moderate number of external connections.

🔧

Test and Measurement Equipment

The A3P060-TQ144I is appropriate for programmable test systems, pattern generation, timing control, instrument interfacing, and automated measurement sequencing. Its 1,536 configurable logic blocks can run multiple counters, state machines, and acquisition pipelines, while 91 I/O provide connections to test fixtures and control buses. The 231 MHz listed frequency and integrated configuration flash support repeatable test setups, and the -40 °C to +85 °C range covers many laboratory and industrial test environments.

🧩

Embedded Control and Soft Processor

The ProASIC3 architecture supports optional Soft ARM capabilities, making the A3P060-TQ144I useful for small embedded-control platforms that need programmable logic beside a soft processor. The 60,000 equivalent gates can divide between bus logic, peripherals, interrupts, and application-specific datapaths, while 91 I/O support external memory and peripherals. The 144-lead package gives designers more I/O than smaller ProASIC3 options, although resource sharing and timing closure must be checked against the selected configuration.

🎥

Security, Surveillance, and Control Panels

The A3P060-TQ144I can coordinate alarm inputs, zone monitoring, relay outputs, event logging, and communications in compact security systems. Its 91 user I/O allow numerous discrete sensors and indicators to be connected directly, while 1,536 logic blocks can implement debouncing, state management, timing, and protocol handling. The 231 MHz listed performance exceeds the needs of many supervisory control functions, and the -40 °C to +85 °C range supports equipment deployed in controlled indoor or industrial environments.

تجویز کردہ پروڈکٹس کا خلاصہ

A3P060-TQG144I Same-family pin-compatible control FPGA استعمال ہوتا ہے: Industrial Automation and PLC Control, Data Acquisition and Instrumentation, Test and Measurement Equipment, Security, Surveillance, and Control Panels A3P060-TQ144 Microchip Technology استعمال ہوتا ہے: Industrial Automation and PLC Control, Communications Interface and Protocol Bridge, Embedded Control and Soft Processor A3P060-1TQ144 Microchip Technology استعمال ہوتا ہے: Communications Interface and Protocol Bridge, Test and Measurement Equipment A3P060-TQ144IY Extended-temperature same-family option استعمال ہوتا ہے: Data Acquisition and Instrumentation, Security, Surveillance, and Control Panels A3P060-TQG144 Same-footprint family alternative استعمال ہوتا ہے: Embedded Control and Soft Processor
What is the Microchip Technology A3P060-TQ144I?
The A3P060-TQ144I is a ProASIC3 FPGA providing 60,000 equivalent gates, 1,536 configurable logic blocks, and 91 user I/O in a 144-lead TQFP/LQFP package. According to the Microchip Technology A3P060 product documentation, the device targets compact reprogrammable logic systems and includes integrated configuration flash. Its listed system frequency of 231 MHz makes it appropriate for control logic, communications interfaces, data acquisition, and industrial automation.
Where can I download the A3P060-TQ144I datasheet PDF?
The A3P060 datasheet and supporting documents are accessible through the official Microchip Technology A3P060 product page at https://www.microchip.com/en-us/product/A3P060. The documentation covers the ProASIC3 architecture, 1.5 V core operation, package details, configuration, pin constraints, and device-specific characteristics. Engineers should select A3P060-TQ144I in the device selector and use the 144-lead package information when assigning PCB signals.
Where can I find the A3P060-TQ144I pinout?
The A3P060-TQ144I pinout is published in the package pin-description tables in the Microchip Technology ProASIC3 documentation. The device uses 144 leads in a TQFP/LQFP package, and its 91 user I/O are assigned through the applicable package pinout. Use the manufacturer package drawing and pin table rather than assigning signals solely from the 91-I/O summary, because power, ground, configuration, and dedicated-function leads must also be routed.
How many logic gates and I/O does the A3P060-TQ144I have?
The A3P060-TQ144I contains 60,000 equivalent gates, 1,536 configurable logic blocks, and 91 user I/O. These figures appear in Microchip Technology and distributor device records for the 144-lead A3P060 device. The 91-I/O count makes the package useful for parallel buses, control interfaces, and data-acquisition systems, while 1,536 logic cells determine the amount of digital logic that can be implemented before routing resources become the limiting factor.
What is the operating voltage of the A3P060-TQ144I?
The A3P060-TQ144I uses a nominal 1.5 V core supply, with a listed maximum frequency of 231 MHz. The device is manufactured using 130 nm CMOS technology. Core supply, I/O supply, and configuration requirements must be wired according to the manufacturer datasheet because the available I/O voltage options can depend on the selected bank configuration and the specific pin used.
What is the operating temperature range of the A3P060-TQ144I?
The A3P060-TQ144I is specified for a -40 °C to +85 °C operating-temperature range and is supplied in a tray. The Microchip Technology direct product listing identifies the 144-lead LQFP package, industrial temperature range, and tray packing media. A related A3P060-TQ144IY grade is listed for operation from -40 °C to +100 °C, so the exact ordering suffix must be checked when temperature margin is important.
What can replace the A3P060-TQ144I without changing the PCB?
The closest board-level replacements are pin-compatible A3P060 devices in the same 144-lead family, including A3P060-TQG144I, A3P060-TQ144, A3P060-TQG144, A3P060-1TQ144, and A3P060-TQ144IY. Their speed, temperature, and RoHS suffixes must be reviewed before substitution because those codes can change qualification or operating limits. Confirm the exact pin table and timing requirements in the Microchip Technology A3P060 documentation.
A3P060-TQ144I vs A3P060-TQG144I: which is the better drop-in choice?
A3P060-TQG144I is the closest drop-in alternative because both use the 144-lead TQFP/LQFP package and are listed with 91 user I/O and 231 MHz performance. The meaningful difference is the ordering suffix, which can represent packaging, qualification, or temperature information. The target A3P060-TQ144I is listed for -40 °C to +85 °C, while A3P060-TQ144IY extends to +100 °C. Verify every suffix field before replacement.
When should I choose the A3P060-TQ144I over another A3P060 grade?
Choose the A3P060-TQ144I when the design requires a 144-lead package, approximately 60,000 equivalent gates, 91 user I/O, and operation from -40 °C to +85 °C. Select a higher-temperature grade only when the enclosure exceeds +85 °C, or select a different speed grade when timing closure cannot be achieved at the required clock rate. The package choice alone does not guarantee interchangeability.
Is the A3P060-TQ144I suitable for industrial control and automation systems?
The A3P060-TQ144I is suitable for many industrial control systems because it combines 1,536 configurable logic blocks, 91 user I/O, on-chip configuration flash, and a -40 °C to +85 °C range. It can implement sequencing, protocol bridging, signal conditioning, and supervisory logic while retaining field reprogrammability. Industrial qualification requirements beyond the specified temperature range should be reviewed separately for the finished system.
Where can I buy A3P060-TQ144I and what is the current lead time?
Use the Request a Quote form on this page to request A3P060-TQ144I availability, lead time, and an order quote. The exact component is a legacy ProASIC3 device, so production planning should include confirmation of the required package suffix, industrial temperature grade, tray presentation, and any traceability documentation. Quote requests provide the most appropriate route for current supply and lifecycle coordination.
How much does the A3P060-TQ144I cost?
Current A3P060-TQ144I pricing is not published as a fixed value on this page because legacy FPGA supply can vary by quantity, traceable documentation, and delivery schedule. Use the Request a Quote form on this page for the current unit quotation and volume breaks. The request should specify the exact MPN, quantity, tray packaging, and whether any automotive, extended-temperature, or inspection requirements are needed.
Is the A3P060-TQ144I currently in stock?
Current A3P060-TQ144I stock should be confirmed through the Request a Quote form on this page rather than assumed from a catalog reference. As a legacy ProASIC3 component, supply can consist of remaining factory inventory, previously packaged stock, or qualified replenishment. For production planning, request lot traceability, date-code information, package condition, and a delivery schedule along with the stock confirmation.
What are the key specifications of A3P060-TQ144I that engineers should know?
The key A3P060-TQ144I specifications are 60,000 equivalent gates, 1,536 configurable logic blocks, 91 user I/O, a 231 MHz listed frequency, and a nominal 1.5 V core supply. The device uses 130 nm CMOS technology in a 144-lead TQFP/LQFP package, supports on-chip configuration flash, and is specified from -40 °C to +85 °C. These parameters position it as a low-density, I/O-rich FPGA for compact control and interface systems.
Can an A3P060-TQ144I replace an A3P060-TQ144IY?
The A3P060-TQ144I can serve as the lower-temperature replacement for an A3P060-TQ144IY when the system remains within -40 °C to +85 °C. The related A3P060-TQ144IY is listed for -40 °C to +100 °C, giving it 15 °C more upper-temperature capability. Both use the 144-lead family package, but the replacement must not be used above +85 °C and should be checked for timing, qualification, and ordering-code differences.
What is the best Actel or Microchip equivalent for A3P060-TQ144I?
The closest Microchip ProASIC3 equivalent is A3P060-TQG144I because it shares the 144-lead package, 60,000-gate density, 91-I/O arrangement, and listed 231 MHz performance. A3P060-TQ144, A3P060-TQG144, and A3P060-1TQ144 are other same-family board-level candidates whose suffix-specific timing, temperature, and qualification requirements must be checked. The ProASIC3 family also supports optional Soft ARM capability, which affects design planning.

کے لیے انجینئرنگ ریفرنس ڈیٹا A3P060-TQ144I — موازنہ، ڈیزائن رہنمائی، اور تعمیل کی معلومات۔

انتخاب کی گائیڈ

Choose the A3P060-TQ144I when an existing design requires a 144-lead ProASIC3 FPGA with 60,000 equivalent gates, 91 user I/O, a 1.5 V core, and an operating range of -40 °C to +85 °C. A3P060-TQG144I is the closest board-level choice when its ordering attributes satisfy the product specification. Use A3P060-TQ144IY when the enclosure can exceed +85 °C because it extends the listed limit to +100 °C. Consider A3P060-TQ144 or A3P060-TQG144 only after checking the missing suffix-specific qualification and temperature details. A3P060-1TQ144 is appropriate when its speed designation satisfies the design's timing requirement. For any replacement, confirm the complete pin table, voltage tolerances, timing grade, configuration method, package drawing, and program compatibility rather than relying on the shared 144-lead outline alone.

متبادلات کے ساتھ موازنہ

پیرامیٹر یہ پروڈکٹ A3P060-TQG144I A3P060-TQ144 A3P060-TQG144 A3P060-1TQ144 A3P060-TQ144IY
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Device Type ProASIC3 FPGA ProASIC3 FPGA ProASIC3 FPGA ProASIC3 FPGA ProASIC3 FPGA ProASIC3 FPGA
Equivalent Gates 60,000 gates 60,000 gates 60,000 gates 60,000 gates 60,000 gates 60,000 gates

اہم امتیازی خصوصیات

  • Matches the listed density and speed of the closest ProASIC3 board option (بمقابلہA3P060-TQG144I)
  • Broader upper-temperature option is available for harsher environments (بمقابلہA3P060-TQ144IY)
  • Explicit industrial temperature specification (بمقابلہA3P060-TQG144)
  • Substantial I/O availability for interface-heavy boards (بمقابلہA3P060-1TQ144)

ڈیزائن نوٹس

Plan the A3P060-TQ144I power tree around its nominal 1.5 V core rail and the separate I/O requirements defined in the manufacturer documentation. Place the required bypass capacitors at the associated supply pins with short return paths, and verify startup sequencing if core and I/O rails are enabled separately. Estimated power dissipation should be calculated from the actual core voltage, I/O activity, and FPGA utilization rather than from the nominal supply voltage alone.

Use the official 144-lead package drawing and pin-description table before routing the board. Keep configuration pins, clock inputs, dedicated pins, and user I/O assignments consistent with the compiled design, and preserve the exposed pad requirements if the selected package drawing includes one. Route clocks as short, continuous paths on a stable reference plane and avoid creating stubs when attaching external test equipment.

Assign I/O standards only after reviewing the bank voltage and pin constraints in the A3P060 documentation. Series damping may be necessary for fast or lightly loaded outputs, while input buffers should receive short routes and appropriate return paths. Do not assume that a logic-level interface is 3.3 V tolerant; verify the selected I/O bank, transition limits, and external driver amplitude against the datasheet.

A common error is treating A3P060-TQ144, A3P060-TQG144I, A3P060-1TQ144, and A3P060-TQ144IY as equivalent ordering codes. The G, I, Y, and -1 fields can identify lead-free, temperature, and speed conditions. Compare each full MPN against the approved BOM before substituting a part, especially when the system operates above +85 °C or depends on a particular timing grade.

تعمیل کی معلومات

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
لیڈ فری
Unknown
ہیلوجن فری
Unknown
کنفلیکٹ منرلز
Unknown

The A3P060-TQG144I listing is identified as lead-free, but the exact compliance status of A3P060-TQ144I requires confirmation from its ordering documentation. No AEC-Q100 qualification is stated for the target.

ڈیٹا کی تصدیق کی تاریخ: 2026-11-16 — ڈیٹا XAIPART کی کمپوننٹ انجینئرنگ ٹیم کے ذریعے تصدیق شدہ اور ترتیب شدہ

متعلقہ تلاشیں

a3p060 vqg100 a3p060 tqg144i a3p060 fgg144i a3p060 vqg100 datasheet a3p060 datasheet actel a3p060 proasic3 a3p060 A3P060-TQ144I datasheet A3P060-TQ144I pinout A3P060-TQ144I equivalent A3P060-TQ144I replacement A3P060-TQ144I vs A3P060-TQG144I A3P060-TQ144I price A3P060-TQ144I stock Microchip A3P060-TQ144I

متعلقہ اجزاء اور اصطلاحات

Microchip Technology A3P060-TQ144I A3P060-TQG144I A3P060-TQ144 A3P060-TQG144 A3P060-1TQ144 A3P060-TQ144IY ProASIC3 FPGA field-programmable gate array programmable logic configurable logic block equivalent gates user I/O on-chip configuration flash Soft ARM TQFP-144 LQFP-144 PQFP-144 surface mount 130 nm CMOS 1.5 V core supply 231 MHz industrial automation data acquisition
فوری کوٹ RFQ
مکمل تفصیلات بھریں — ہماری سیلز ٹیم 24 گھنٹوں میں جواب دے گی
پارٹ نمبر مینوفیکچرر پیکج QTY ہدف قیمت کل رقم
✓
کوٹ جمع ہو گیا!

ہم 24 گھنٹوں کے اندر آپ کے ای میل کا جواب دیں گے

1
RFQ جمع ہو گیا
2
کوٹ موصول ہو گیا
3
آرڈر دے دیا گیا
4
ادائیگی
5
بھیج دیا گیا
6
ڈیلیور شدہ
RFQ تفصیلات دیکھیں