A3P250-VQ100 - 250K-Gate ProASIC3 FPGA | Microchip Technology
Référence : A3P250-VQ100 ✓ ActifA3P250-VQ100 Présentation
A field-programmable gate array is a semiconductor whose digital logic is defined after fabrication. An FPGA falls within the programmable-logic hierarchy, alongside complex programmable logic devices and programmable system-on-chip solutions. Unlike a fixed-function application-specific integrated circuit, the A3P250-VQ100 lets engineers implement control logic, interfaces, state machines, and data-processing functions in one reprogrammable device. Its flash-based configuration approach is useful when designs require field updates, low power after configuration, or a compact implementation without an external configuration PROM.
Key characteristics include 250,000 logic gates, 68 I/O lines, and 36,864 total RAM bits. The device is offered in the VQ100 package, identified in product listings as a 100-pin TQFP package measuring 14 mm by 14 mm. ProASIC3 devices also support a broad range of embedded resources for combining logic and programmable peripherals in a single chip. These features allow the A3P250-VQ100 to consolidate functions that might otherwise require several programmable and fixed-function devices.
The 68 available I/O lines provide connectivity to external sensors, converters, memories, communications transceivers, and human-interface circuitry. The 36,864-bit block RAM can support buffering, packet handling, status storage, data formatting, and other finite-state workloads. Designers should evaluate available I/O characteristics, supported clocking, memory access, and selected I/O standards against the intended board-level interfaces before finalizing a pin assignment.
Typical uses include industrial control and factory automation, compact communications equipment, embedded instrumentation, and sensor-processing systems. In these applications, the FPGA can implement protocol conversion, timing control, data acquisition logic, and supervisory functions while keeping the bill of materials compact. Its reprogrammability also allows design revisions and field configuration updates without changing the PCB.
PCB planning should preserve clean power and ground distribution around all 100 package leads, with particular attention to sensitive clock and I/O paths. Confirm the exact pin functions, supported I/O standards, configuration sequence, and decoupling requirements in the manufacturer datasheet before fabrication. For legacy industrial systems, the A3P250-VQ100 provides a useful migration target from smaller programmable logic devices while retaining a relatively small package.
Alternatives de remplacement direct pour A3P250-VQ100 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec A3P250-VQ100 (même facteur de forme et même empreinte) — différant par Core Supply Voltage, Configuration Memory, Package, Family, RoHS Status.
A3P250-VQ100I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P250-VQ100T
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P250L-VQ100I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P250-VQ100 Valeurs maximales et caractéristiques électriques
| Product Type | ProASIC3 flash field-programmable gate array (FPGA) |
| Logic Gates | 250,000 gates |
| Total RAM | 36,864 bits |
| User I/O Lines | 68 I/O |
| Package Pin Count | 100 pins |
| Package Type | 100-pin TQFP |
| Package Dimensions | 14 mm x 14 mm |
| Core Supply Voltage | 1.425 V to 1.575 V |
| Configuration Memory | On-chip flash |
| Programming Technology | Flash-programmable nonvolatile configuration |
| Type de montage | Surface mount |
| Commercial Junction Temperature | 0 °C to 85 °C |
| Logic Density | 3KLEs |
| Block RAM Capacity | 36 Kbit |
| Device Family | ProASIC3 |
| Automotive Qualification | AEC-Q100 qualified in the A3P250-VQ100T variant |
Guide de configuration des broches du A3P250-VQ100 14 mm x 14 mm
Configuration des broches du A3P250-VQ100 (boîtier 14 mm x 14 mm). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour A3P250-VQ100.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
A3P250-VQ100 convient pour 6 applications: Industrial Control and Factory Automation, Communications Interface and Protocol Conversion, Data Acquisition and Sensor Processing, Embedded Instrumentation and Signal Conditioning, Automotive Control Modules, Embedded Security and Access Control.
Industrial Control and Factory Automation
The A3P250-VQ100 fits compact machine-control systems that combine sequencing, I/O conditioning, and protocol logic in one programmable device. Its 250,000 gates provide room for multiple state machines, while 68 I/O lines support encoders, limit switches, relays, and digital sensor inputs. The 36,864-bit block RAM can buffer acquired values or retain operating state between control cycles. Because ProASIC3 configuration is held in flash, the controller can retain its programmed logic without a separate configuration PROM, and its reprogrammability can support design or field updates without PCB changes.
Recommandé
Communications Interface and Protocol Conversion
The A3P250-VQ100 is suitable for compact protocol bridges, framing logic, and communications controllers requiring parallel logic and configurable I/O. The 68 user I/O lines can accommodate data buses, control signals, and transceiver interfaces, while the 36,864-bit block RAM supports packet buffering and temporary data storage. The 250,000-gate capacity allows timing logic, state machines, and interface adaptation to coexist on one device. Its flash-based ProASIC3 configuration also simplifies deployments where the system must operate without continuous configuration from an external host.
Recommandé
Data Acquisition and Sensor Processing
The A3P250-VQ100 can implement acquisition sequencing, digital filtering, thresholding, and data packing around external sensors and converters. Its 68 I/O lines provide parallel connectivity for sensor outputs, control strobes, and status signals, while 36,864 bits of block RAM can hold samples or intermediate results. The 250,000-gate logic budget supports parallel pipelines and multiple control blocks without requiring several small programmable devices. In compact instrumentation, flash configuration provides a simple way to retain the design in the final board, while device reprogrammability supports configuration changes during development and maintenance.
Recommandé
Embedded Instrumentation and Signal Conditioning
The A3P250-VQ100 offers enough programmable logic to combine timing control, digital conditioning, status tracking, and interface management in a compact instrument. Its 68 I/O lines can connect multiplexers, converters, calibration logic, and display or communications interfaces, while the 36,864-bit block RAM can support sample queues and calibration records. With 250,000 gates, designers can implement parallel processing rather than forcing all functions into a simple state machine. The 100-pin TQFP package reduces board area compared with larger FPGA packages while preserving enough pins for moderate external connectivity.
Recommandé
Automotive Control Modules
The A3P250 family can support compact vehicle control modules where deterministic programmable logic, serial interfaces, and local decision making are required. The base A3P250-VQ100 is identified as the commercial-temperature ordering variant, while A3P250-VQ100T is explicitly AEC-Q100 qualified and uses the same VQ100 package family. Its 250,000 gates and 68 I/O lines can consolidate control sequences, diagnostic logic, and communication handling. Qualification, temperature, voltage, and lifecycle requirements must be confirmed for the exact ordering code before use in a safety-relevant automotive design.
Recommandé
Embedded Security and Access Control
The A3P250-VQ100 can consolidate authentication sequencing, credential handling, alarm logic, and communications in a small programmable platform. Its 36,864-bit block RAM is suitable for short message buffers and credential-processing registers, while 68 I/O lines support readers, indicators, alarms, and network or serial interfaces. The 250,000-gate capacity allows cryptographic or checksum-related control logic to be combined with supervisory state machines in one device. Flash configuration is valuable in fixed installations because the programmed function remains available without an external configuration source after power-up.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour A3P250-VQ100 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | A3P250-VQ100I | A3P250-VQ100T | A3P250L-VQ100I |
|---|---|---|---|---|
| Package | VQ100 100-pin TQFP, 14 mm x 14 mm | VQ100 100-pin TQFP | VQ100 100-pin TQFP | VQ100 100-pin TQFP |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
Principaux différenciateurs
- Higher logic capacity than lower-density same-family migration targets (vs A3P125)
- Automotive-qualified ordering option remains available in the same VQ100 footprint (vs A3P250-VQ100)
- Commercial-temperature A3P250 configuration for industrial and embedded systems (vs A3P250-VQ100T)
Notes de conception
Design the core supply for the 1.425 V to 1.575 V range identified for the A3P250-VQ100T variant, and verify the exact requirements for A3P250-VQ100 in the manufacturer datasheet. Place required bypass capacitors at the package power pins with short, low-inductance connections. Separate sensitive core current paths from switching I/O return currents, and account for simultaneous output switching when selecting regulator and copper widths.
Route the 100-pin TQFP perimeter signals according to the exact pin-description table for A3P250-VQ100. Keep clock traces short and return them to an uninterrupted ground reference, while separating clocks from high-speed outputs and switching interfaces. Use the manufacturer package drawing and recommended land pattern rather than relying on a generic 100-pin symbol. A PCB with adequate thermal copper should also reduce ground bounce during simultaneous I/O activity.
Do not treat all A3P250 order codes as automatic substitutes. A3P250-VQ100, A3P250-VQ100I, A3P250-VQ100T, and A3P250L-VQ100I differ in ordering attributes that may affect temperature grade, qualification, resources, or device behavior. Before replacing a component, compare the exact pin description, electrical limits, configuration method, timing, lifecycle status, and any programmed-device restrictions in the manufacturer documentation.
A lower-density A3P125, A3P060, or A3P030 device may offer same-package pin-compatibility considerations, but it is not automatically a drop-in replacement for an A3P250 design because the available logic and RAM resources are lower. Recompile the project, rerun timing analysis, and confirm every assigned I/O and embedded block before authorizing a migration to a lower-density device.
Informations de conformité
The related A3P250-VQ100T ordering variant is identified as AEC-Q100 qualified. The base A3P250-VQ100 is a commercial-temperature ordering variant; RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not explicitly confirmed.