A3P600-1PQ208 - 154-I/O ProASIC3 FPGA | Microchip
Référence : A3P600-1PQ208 ✓ ActifA3P600-1PQ208 Présentation
An FPGA is a programmable digital semiconductor whose logic fabric, I/O, and embedded resources can be configured after manufacture. The A3P600 belongs to the ProASIC3 family, a low-density-to-medium-density FPGA hierarchy positioned between simple programmable logic and larger ASIC implementations. Its combination of reprogrammability, single-chip integration, and comparatively low total cost of ownership supports rapid design iteration and production programming.
The A3P600-1PQ208 provides 154 I/O and 110592 logic elements according to the manufacturer product listing. Its four I/O-bank architecture supports bank-specific supply domains, allowing compatible voltage standards to be grouped within the same bank. This flexibility is useful for industrial control, communications, instrumentation, and embedded systems that combine external buses, counters, control outputs, and programmable logic in one device.
ProASIC3 devices use nonvolatile flash configuration, allowing the programmed design to remain in the device without a continuously powered configuration RAM. The A3P600 family also supports in-system programming and peripheral resources for common control logic. Exact core voltage, I/O standards, supported clock frequencies, and programming specifications should be selected from the complete Microchip family documentation for the specific ordering suffix.
Typical uses include industrial controllers, test and measurement equipment, communications interfaces, motor and sequencing control, sensor aggregation, and general-purpose embedded logic. The 154-I/O count is particularly useful when a design must connect multiple buses, control several actuators, capture parallel input data, or provide programmable glue logic around a companion processor.
Before layout, assign every external signal to a compatible I/O bank and verify its voltage standard against the device documentation. Confirm the 208-BFQFP land pattern, power-supply requirements, decoupling, configuration pins, and programming interface directly from the manufacturer package drawings and pin-definition tables. Do not infer pin functions from the commercial A3P600-PQ208 ordering code because suffix conventions can distinguish speed, temperature, or other device attributes.
This page combines manufacturer family information, exact ordering-code details, package information, practical configuration guidance, and same-package replacement analysis. It is designed to help engineers evaluate the A3P600-1PQ208 for new industrial, communications, instrumentation, and embedded-control designs without relying only on a basic distributor listing.
Alternatives de remplacement direct pour A3P600-1PQ208 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec A3P600-1PQ208 (même facteur de forme et même empreinte) — différant par Configuration Memory, Package, Process Technology, Mounting Type, Device Type.
A3P600-PQ208
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P600-PQ208I
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
A3P600-PQG208
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P600-PQG208I
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →A3P600-1PQ208I
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
A3P600-1PQ208 Valeurs maximales et caractéristiques électriques
| Device Type | ProASIC3 field-programmable gate array (FPGA) |
| Logic Elements | 110592 logic elements |
| User I/O Count | 154 I/O |
| Boîtier | 208-BFQFP |
| Total Pin Count | 208 pins |
| Programmable Logic Family | ProASIC3 |
| Configuration Memory | Nonvolatile flash |
| I/O Bank Count | 4 banks |
| Programming Support | In-system programming |
| Type de montage | Surface mount |
Guide de configuration des broches du A3P600-1PQ208 208-bfqfp
Configuration des broches du A3P600-1PQ208 (boîtier 208-bfqfp). Ce circuit intégré numérique comprend des GPIO, des interfaces de communication (UART, SPI, I2C) et des broches d'alimentation. Consultez la fiche technique du fabricant pour les fonctions alternatives des broches et les options de configuration. Indispensable pour la conception de systèmes embarqués et la conception de circuits imprimés.
Aucune donnée de brochage détaillée disponible pour A3P600-1PQ208.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
A3P600-1PQ208 convient pour 6 applications: Industrial PLC and Machine Controller, Communications Interface Controller, Test and Measurement Front End, Motor Control and Sequencing, Sensor Aggregation and Data Acquisition, Embedded System Glue Logic.
Industrial PLC and Machine Controller
The A3P600-1PQ208 is well suited to compact programmable logic controllers because it combines 110592 logic elements with 154 user I/O in a 208-BFQFP package. Those resources can support digital sequencing, interlocks, counters, pulse generation, machine inputs, and actuator outputs without requiring a separate CPLD for every interface. Its four I/O banks allow compatible voltage standards to be grouped, while nonvolatile flash configuration preserves the control program through power cycles. A designer should assign each field interface to a bank with the appropriate supply voltage and verify timing, input thresholds, and output drive requirements against the complete device documentation.
Recommandé
Communications Interface Controller
The A3P600-1PQ208 can serve as a programmable interface between a communications transceiver and host logic. Its 154 I/O provide ample parallel connections for data, framing, flow control, interrupts, and status signaling, while 110592 logic elements support protocol state machines and FIFO-like data handling. The four-bank structure helps organize compatible digital interfaces, and flash-based configuration allows the same hardware platform to support multiple firmware or configuration revisions. For a production design, confirm whether the required interface can meet timing with the selected suffix and use the manufacturer pin-definition and I/O-standard tables before assigning external pins.
Recommandé
Test and Measurement Front End
The A3P600-1PQ208 is applicable to instrumentation that must combine parallel measurement capture, timing control, pattern generation, and status reporting. The 154-I/O count supports multiple instrument interfaces, and the 110592-element logic fabric can implement acquisition control, trigger logic, counters, and communication formatting. Because the four I/O banks accept separate VCCIB domains when configured compatibly, the device can organize unrelated voltage interfaces more effectively than a single-bank design. Engineers should budget logic resources for each acquisition channel, check supported I/O standards, and reserve pins for configuration and clock distribution according to the official 208-BFQFP pin table.
Recommandé
Motor Control and Sequencing
The A3P600-1PQ208 can implement deterministic sequencing, stepper control, encoder decoding, interlocks, and digital command processing in one programmable device. Its 110592 logic elements provide capacity for parallel axis and state-machine logic, while 154 I/O simplify connections to position sensors, limit switches, drivers, and supervisory controls. Four I/O banks permit compatible logic voltages to remain grouped, and nonvolatile flash preserves the control configuration without continuous configuration-RAM power. The design must still verify I/O drive, timing, and operating-temperature requirements for the selected ordering suffix and isolate noisy motor-power paths from sensitive digital routing.
Recommandé
Sensor Aggregation and Data Acquisition
The A3P600-1PQ208 can consolidate multiple digital sensors, switches, counters, and parallel sensor outputs into a programmable acquisition layer. With 154 I/O and 110592 logic elements, it can handle sensor multiplexing, sampling control, filtering, event timestamping, and data packaging before forwarding results to a processor. The bank's dedicated VCCIB supplies help organize compatible voltage domains, while flash configuration supports field updates when the update process allows it. Confirm input thresholds, supported I/O standards, clock-domain requirements, and pin assignments for every sensor interface before finalizing the schematic and PCB.
Recommandé
Embedded System Glue Logic
The A3P600-1PQ208 can bridge a host processor to RAM, flash, displays, ADCs, communication devices, and discrete I/O through deterministic programmable logic. Its 154 user I/O and 110592 logic elements are useful for bus arbitration, address decoding, interrupt merging, data-width conversion, and timing control. Four I/O banks provide structured grouping of compatible interfaces, and nonvolatile flash permits a compact single-chip implementation with configuration retained when power is removed. Engineers should treat it as a companion logic device rather than an automatic processor replacement, verifying package ballouts, voltage standards, clock requirements, and design-tool support in the Microchip documentation.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour A3P600-1PQ208 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | A3P600-PQ208 | A3P600-PQ208I | A3P600-PQG208 | A3P600-PQG208I | A3P600-1PQ208I |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 208-BFQFP | 208-BFQFP - same package | 208-BFQFP - same package | 208-BFQFP - same package | 208-BFQFP - same package | 208-BFQFP - same package |
| Device Type | ProASIC3 FPGA | ProASIC3 FPGA | ProASIC3 FPGA | ProASIC3 FPGA | ProASIC3 FPGA | ProASIC3 FPGA |
| I/O Bank Count | 4 banks | 4 banks | 4 banks | 4 banks | 4 banks | 4 banks |
| Configuration Technology | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash | Nonvolatile flash |
| Programming Support | In-system programming | In-system programming | In-system programming | In-system programming | In-system programming | In-system programming |
Principaux différenciateurs
- High I/O capacity within a leaded 208-pin package (vs A3P600-PQ208)
- Four independently supplied I/O banks (vs A3P600-PQ208I)
- Nonvolatile flash configuration supports field updates (vs A3P600-PQG208)
Notes de conception
Assign each external interface to an I/O bank that supports its voltage standard, then connect the corresponding VCCIB supply as defined in the A3P600 family documentation. The four-bank architecture is useful for separating unrelated logic domains, but it does not permit incompatible standards in the same bank. Review the complete pin-definition table and power-supply diagram before assigning signals so the PCB does not require bank changes.
Do not treat A3P600-PQ208 as an unconditional substitute for A3P600-1PQ208 solely because both use 208-BFQFP. Check the complete Microchip ordering table for the meaning of each suffix and compare speed, temperature grade, qualification, and electrical limits. Confirm configuration compatibility as well as PCB pin compatibility before releasing a replacement to production.
Use the official 208-BFQFP land pattern and maintain the manufacturer-recommended power and ground connectivity. Place decoupling structures at the associated supply pins, route configuration signals away from high-current switching nodes, and provide a stable clock path with controlled impedance. Because this package has 208 leads, inspect the assembled board for bridging and verify polarity of every programmable I/O against its external circuit.
Plan separate core and I/O supply paths according to the family power architecture, including the dedicated VCCIB domains. Check supply sequencing, current capacity, startup behavior, and tolerance against the complete electrical tables. Avoid assigning compatible signals to a bank merely to reduce routing complexity when doing so would mix unrelated voltage standards or create unnecessary return-current paths.
Informations de conformité
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration for the exact ordering code was identified. AEC-Q100 is marked not applicable because this industrial-programmable FPGA is not presented as an automotive-qualified ordering variant.