AD602JR - Dual 35MHz Low-Noise VGA | Analog Devices
Référence : AD602JR ✓ ActifAD602JR Présentation
A variable gain amplifier, or VGA, is an amplifier whose gain can be adjusted by an external control signal. A VGA belongs to the broader signal-chain hierarchy of amplifier ICs, analog amplifiers, and semiconductor components. Unlike a fixed-gain operational amplifier, the AD602JR supports precise, electronically controlled gain adjustment while preserving low noise and wide bandwidth, making it useful when received signal strength changes over a wide range.
The AD602JR offers two independent channels with linear-in-decibel gain control and two selectable gain ranges. According to the Analog Devices AD600/AD602 data sheet, the amplifier maintains accurate absolute gain within 0.3 dB and produces low distortion of -60 dBc THD with a 1 V output. These characteristics are important in receiver chains where gain calibration, channel-to-channel consistency, and signal fidelity affect the quality of the final measurement or image.
Each channel combines a wideband signal path with low-noise input stages and independent gain-control inputs. The advertised 35 MHz -3 dB bandwidth allows the amplifier to process signals beyond the baseband range of many conventional op amps, while the 1.4 nV/√Hz input-noise figure supports high-sensitivity front ends. The dual architecture also reduces board area by placing two complete gain-controlled channels in one 16-lead package.
Typical uses include ultrasound receiver channels, diagnostic medical instrumentation, industrial ultrasound systems, test and measurement equipment, communications receivers, and other wideband applications requiring controlled gain. In an ultrasound system, independent channel gain adjustment can compensate for attenuation and varying echo strength. In instrumentation, the device can provide calibrated gain ahead of an ADC, sampling circuit, or subsequent signal-processing stage.
Designers should preserve adequate supply headroom, bypass the supply pins close to the device, and follow the pin-description and layout guidance in the manufacturer data sheet. Gain-control timing and filtering should be evaluated together with signal bandwidth, because excessive control bandwidth can admit unwanted noise. The 16-lead SOIC footprint also requires attention to thermal dissipation when operating near its rated supply limits.
This product record combines the manufacturer's key performance data, package information, application guidance, and comparison-oriented engineering notes. It helps designers evaluate the AD602JR as a dual low-noise VGA, identify the trade-offs among same-family ordering variants, and plan ultrasound or precision analog front ends without overlooking bandwidth, gain accuracy, noise, or layout requirements.
Alternatives de remplacement direct pour AD602JR — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec AD602JR (même facteur de forme et même empreinte) — différant par Gain Range, Product Type, Signal Type, Total Harmonic Distortion.
AD602ARZ
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →AD602JRZ
✅ Remplacement direct ⚠️ Spécifications non vérifiéesContactez-nous pour le prix
Voir la fiche technique →AD602AZ
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
AD602ARZ-R7
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
AD602JRZ-R7
✅ Remplacement direct ⚠️ Spécifications non vérifiées📋 Alternative de référence (hors catalogue)
AD602JR Valeurs maximales et caractéristiques électriques
| Number of Channels | 2 channels |
| Channel Architecture | 2 independent gain-control channels |
| Gain Range | -10 dB to +30 dB |
| Gain-Control Response | Linear in dB |
| Gain Accuracy | 0.3 dB accurate absolute gain |
| Input Noise Density | 1.4 nV/√Hz |
| -3 dB Bandwidth | 35 MHz |
| Total Harmonic Distortion | -60 dBc THD at 1 V output |
| Number of Gain Ranges | 2 gain ranges |
| Upper Gain Range | +30 dB |
| Package Type | 16-lead SOIC |
| Type de montage | Surface mount |
| Primary Application | Ultrasound imaging |
| Signal Type | Analog |
| Control Interface | Analog gain control |
Guide de configuration des broches du AD602JR 16-lead soic
Configuration des broches du AD602JR (boîtier 16-lead soic). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour AD602JR.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
AD602JR convient pour 6 applications: Ultrasound Receiver Front Ends, Diagnostic Medical Imaging, Industrial Ultrasound Systems, Communications Receivers, Precision Test and Measurement, Wideband Sensor Signal Conditioning.
Ultrasound Receiver Front Ends
The AD602JR is well suited to ultrasound receiver channels because each of its two independent channels provides a -10 dB to +30 dB gain range with a 35 MHz -3 dB bandwidth. Adjusting receiver gain as echo strength changes helps keep later stages within their usable signal range. The specified 1.4 nV/√Hz input-noise density is valuable when the received echo is small, while -60 dBc THD at a 1 V output helps preserve waveform detail. The dual architecture can serve two receive elements in one 16-lead SOIC, reducing board area while preserving independent gain control.
Recommandé
Diagnostic Medical Imaging
In diagnostic imaging equipment, the AD602JR can provide calibrated amplification immediately after a sensor or transducer stage, where signal amplitude may vary significantly between patients or measurement channels. Its linear-in-decibel gain control makes adjustment predictable across the -10 dB to +30 dB range, and the 0.3 dB absolute-gain accuracy supports repeatable channel calibration. The 35 MHz -3 dB bandwidth accommodates wideband echo waveforms, while the low 1.4 nV/√Hz input-noise density avoids degrading weak signals before downstream conversion and processing.
Recommandé
Industrial Ultrasound Systems
The AD602JR fits industrial ultrasonic inspection systems that need repeatable gain adjustment across multiple sensor channels. Two independent channels allow separate control of reflected signals from different transducers, while the -10 dB to +30 dB range accommodates attenuation caused by distance, material, or surface condition. Its 35 MHz -3 dB bandwidth supports high-frequency ultrasonic content, and the -60 dBc THD specification at a 1 V output helps avoid introducing distortion into reflected-wave measurements. The 16-lead SOIC package supports compact surface-mount instrumentation.
Recommandé
Communications Receivers
The AD602JR can serve as a wideband gain-control stage in communications receivers when the incoming signal level changes over a broad range. Linear-in-decibel control simplifies attenuation and amplification calibration across the -10 dB to +30 dB range. Its 35 MHz -3 dB bandwidth is suitable for wideband receiver front ends, while the 1.4 nV/√Hz input-noise density limits added broadband noise during low-level reception. Dual independent channels may also support diversity receivers, phased RF measurement channels, or parallel test points within a single 16-lead package.
Recommandé
Precision Test and Measurement
In precision instrumentation, the AD602JR can adjust signal amplitude before an ADC or analysis chain without changing the underlying system gain setting. The -10 dB to +30 dB range offers attenuation for preventing overload as well as amplification for low-level measurements, and the 0.3 dB absolute-gain accuracy supports repeatable test setup. A 35 MHz -3 dB bandwidth accommodates high-frequency test signals, while -60 dBc THD at a 1 V output helps maintain measurement fidelity. Two independent channels can monitor or condition two related signals simultaneously.
Recommandé
Wideband Sensor Signal Conditioning
The AD602JR is appropriate for sensor front ends whose output amplitude varies over a wide dynamic range. Placing gain control immediately after the sensor can reduce the burden on later stages and help maintain a consistent operating level for conversion. The low 1.4 nV/√Hz input-noise density is beneficial when the sensor output is small, and the 35 MHz -3 dB bandwidth preserves fast sensor transients. Independent control of the two channels is useful for differential, complementary, or multi-element sensing arrangements where separate calibration is required.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour AD602JR — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | AD602ARZ | AD602JRZ | AD602AZ | AD602ARZ-R7 | AD602JRZ-R7 |
|---|---|---|---|---|---|---|
| Package | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC | 16-lead SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Number of Channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels |
| Gain Range | -10 dB to +30 dB | -10 dB to +30 dB | -10 dB to +30 dB | -10 dB to +30 dB | -10 dB to +30 dB | -10 dB to +30 dB |
| Gain-Control Response | Linear in dB | Linear in dB | Linear in dB | Linear in dB | Linear in dB | Linear in dB |
| Absolute Gain Accuracy | 0.3 dB | 0.3 dB | 0.3 dB | 0.3 dB | 0.3 dB | 0.3 dB |
| Input Noise Density | 1.4 nV/√Hz | 1.4 nV/√Hz | 1.4 nV/√Hz | 1.4 nV/√Hz | 1.4 nV/√Hz | 1.4 nV/√Hz |
| -3 dB Bandwidth | 35 MHz | 35 MHz | 35 MHz | 35 MHz | 35 MHz | 35 MHz |
| Total Harmonic Distortion | -60 dBc THD at 1 V output | -60 dBc THD at 1 V output | -60 dBc THD at 1 V output | -60 dBc THD at 1 V output | -60 dBc THD at 1 V output | -60 dBc THD at 1 V output |
Principaux différenciateurs
- Two independently controlled receive channels (vs AD602ARZ)
- Wideband gain control (vs AD602JRZ)
- Low-noise precision gain control (vs AD602AZ)
Notes de conception
Follow the AD600/AD602 manufacturer's pin and layout guidance when assigning the 16-lead SOIC footprint. Place input, output, supply-bypass, and gain-control connections so that high-impedance control nodes remain away from fast output paths. Keep analog signal traces short and return them to a continuous ground plane, while separating the two channels where independent gain settings could otherwise couple through shared supply impedance.
Use the supply limits and bypass recommendations in the AD600/AD602 data sheet, Rev. F, and place decoupling capacitors close to the device's supply pins. Adequate bypass is particularly important because two independent channels can create changing current demand during gain adjustment. Provide the required voltage headroom for the selected output level and operating frequency, and verify that supply ripple and ground bounce do not degrade gain accuracy or distortion.
The AD602JR provides a 35 MHz -3 dB bandwidth, so board parasitics, connector transitions, and control-line coupling become more important as operating frequency rises. Route gain-control signals away from input and output traces, terminate unused or unused-range nodes according to the manufacturer's circuit examples, and preserve a continuous return path. Validate the complete two-channel layout with time-domain measurements if echo-waveform fidelity is critical.
Do not treat every AD602 ordering suffix as electrically interchangeable without checking temperature grade, qualification, and shipment format. AD602JN is not a drop-in option because it uses a DIP rather than the AD602JR's 16-lead SOIC. Likewise, do not substitute a generic VGA solely by package count; verify gain-control polarity, gain range, bandwidth, noise, distortion, supply requirements, and the exact manufacturer pin assignment before releasing a replacement to production.
Informations de conformité
No explicit compliance declarations for the exact AD602JR ordering configuration were identified. AEC-Q100 is treated as not applicable because the device is an analog amplifier IC rather than an automotive-qualified component.