Analog Devices

AD602JR - Dual 35MHz Low-Noise VGA | Analog Devices

부품 번호: AD602JR ✓ 활성
16-lead SOIC Package
MOQ: 1 |

AD602JR 개요

The Analog Devices AD602JR is a dual-channel, low-noise variable gain amplifier optimized for ultrasound imaging and other precision signal-chain applications. Each independent channel provides a gain range of -10 dB to +30 dB, combines a 1.4 nV/√Hz input-noise specification, and supports bandwidths up to 35 MHz at the -3 dB point. The device is packaged in a 16-lead SOIC for surface-mount assembly.

A variable gain amplifier, or VGA, is an amplifier whose gain can be adjusted by an external control signal. A VGA belongs to the broader signal-chain hierarchy of amplifier ICs, analog amplifiers, and semiconductor components. Unlike a fixed-gain operational amplifier, the AD602JR supports precise, electronically controlled gain adjustment while preserving low noise and wide bandwidth, making it useful when received signal strength changes over a wide range.

The AD602JR offers two independent channels with linear-in-decibel gain control and two selectable gain ranges. According to the Analog Devices AD600/AD602 data sheet, the amplifier maintains accurate absolute gain within 0.3 dB and produces low distortion of -60 dBc THD with a 1 V output. These characteristics are important in receiver chains where gain calibration, channel-to-channel consistency, and signal fidelity affect the quality of the final measurement or image.

Each channel combines a wideband signal path with low-noise input stages and independent gain-control inputs. The advertised 35 MHz -3 dB bandwidth allows the amplifier to process signals beyond the baseband range of many conventional op amps, while the 1.4 nV/√Hz input-noise figure supports high-sensitivity front ends. The dual architecture also reduces board area by placing two complete gain-controlled channels in one 16-lead package.

Typical uses include ultrasound receiver channels, diagnostic medical instrumentation, industrial ultrasound systems, test and measurement equipment, communications receivers, and other wideband applications requiring controlled gain. In an ultrasound system, independent channel gain adjustment can compensate for attenuation and varying echo strength. In instrumentation, the device can provide calibrated gain ahead of an ADC, sampling circuit, or subsequent signal-processing stage.

Designers should preserve adequate supply headroom, bypass the supply pins close to the device, and follow the pin-description and layout guidance in the manufacturer data sheet. Gain-control timing and filtering should be evaluated together with signal bandwidth, because excessive control bandwidth can admit unwanted noise. The 16-lead SOIC footprint also requires attention to thermal dissipation when operating near its rated supply limits.

This product record combines the manufacturer's key performance data, package information, application guidance, and comparison-oriented engineering notes. It helps designers evaluate the AD602JR as a dual low-noise VGA, identify the trade-offs among same-family ordering variants, and plan ultrasound or precision analog front ends without overlooking bandwidth, gain accuracy, noise, or layout requirements.

드롭인 대체품: AD602JR — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

이 시리즈의 변형

다음과 드롭인 호환되는 동일 시리즈 모델: AD602JR (동일 폼 팩터 및 풋프린트) — 차이점: Gain Range, Product Type, Signal Type, Total Harmonic Distortion.

Analog Devices
Product Type: Dual-channel variable gain amplifier
Total Harmonic Distortion: −60 dBc at 1 V output
비교 대상: AD602JR →
Analog Devices
Product Type: Dual variable gain amplifier
Signal Type: Dual analog input and output signal channels
비교 대상: AD602JR →
Analog Devices
Gain Range: −10 dB to +30 dB per channel
비교 대상: AD602JR →

AD602ARZ

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 16-lead SOIC
Dual variable gain amplifier · 2 channels · 2 independent channels · 11.25 dB to 31 dB per channel · Low-noise architecture · Wideband · Dual analog input and output signal channels · Ultrasound imaging

가격 문의

데이터시트 보기 →

AD602JRZ

✅ 드롭인 ⚠️ 사양 미검증
Analog Devices
📦 16-lead SOIC
Dual-channel variable gain amplifier · 2 channels · −10 dB to +30 dB per channel · 31.07 dB · 35 MHz nominal · Nominally independent of gain · Up to +5.25 V · Down to −5.25 V

가격 문의

데이터시트 보기 →

AD602AZ

✅ 드롭인 ⚠️ 사양 미검증
📦 16-lead SOIC
Same -10 dB to +30 dB gain range and 35 MHz -3 dB bandwidth, a 0 dB functional gain difference; ordering suffix differs

📋 참조 대체품 (카탈로그에 없음)

AD602ARZ-R7

✅ 드롭인 ⚠️ 사양 미검증
📦 16-lead SOIC
Same -10 dB to +30 dB gain range and 35 MHz -3 dB bandwidth, a 0 dB functional gain difference; tape-and-reel shipment option

📋 참조 대체품 (카탈로그에 없음)

AD602JRZ-R7

✅ 드롭인 ⚠️ 사양 미검증
📦 16-lead SOIC
Same -10 dB to +30 dB gain range and 35 MHz -3 dB bandwidth, a 0 dB functional gain difference; tape-and-reel shipment option

📋 참조 대체품 (카탈로그에 없음)

AD602JR 최대 정격 & 전기적 특성

Number of Channels 2 channels
Channel Architecture 2 independent gain-control channels
Gain Range -10 dB to +30 dB
Gain-Control Response Linear in dB
Gain Accuracy 0.3 dB accurate absolute gain
Input Noise Density 1.4 nV/√Hz
-3 dB Bandwidth 35 MHz
Total Harmonic Distortion -60 dBc THD at 1 V output
Number of Gain Ranges 2 gain ranges
Upper Gain Range +30 dB
Package Type 16-lead SOIC
실장 유형 Surface mount
Primary Application Ultrasound imaging
Signal Type Analog
Control Interface Analog gain control

AD602JR 16-lead soic 핀 구성 가이드

AD602JR(16-lead soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.

AD602JR의 16-lead soic 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: AD602JR.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

AD602JR 적합 용도: 6 애플리케이션s: Ultrasound Receiver Front Ends, Diagnostic Medical Imaging, Industrial Ultrasound Systems, Communications Receivers, Precision Test and Measurement, Wideband Sensor Signal Conditioning.

💊

Ultrasound Receiver Front Ends

The AD602JR is well suited to ultrasound receiver channels because each of its two independent channels provides a -10 dB to +30 dB gain range with a 35 MHz -3 dB bandwidth. Adjusting receiver gain as echo strength changes helps keep later stages within their usable signal range. The specified 1.4 nV/√Hz input-noise density is valuable when the received echo is small, while -60 dBc THD at a 1 V output helps preserve waveform detail. The dual architecture can serve two receive elements in one 16-lead SOIC, reducing board area while preserving independent gain control.

💊

Diagnostic Medical Imaging

In diagnostic imaging equipment, the AD602JR can provide calibrated amplification immediately after a sensor or transducer stage, where signal amplitude may vary significantly between patients or measurement channels. Its linear-in-decibel gain control makes adjustment predictable across the -10 dB to +30 dB range, and the 0.3 dB absolute-gain accuracy supports repeatable channel calibration. The 35 MHz -3 dB bandwidth accommodates wideband echo waveforms, while the low 1.4 nV/√Hz input-noise density avoids degrading weak signals before downstream conversion and processing.

🏭

Industrial Ultrasound Systems

The AD602JR fits industrial ultrasonic inspection systems that need repeatable gain adjustment across multiple sensor channels. Two independent channels allow separate control of reflected signals from different transducers, while the -10 dB to +30 dB range accommodates attenuation caused by distance, material, or surface condition. Its 35 MHz -3 dB bandwidth supports high-frequency ultrasonic content, and the -60 dBc THD specification at a 1 V output helps avoid introducing distortion into reflected-wave measurements. The 16-lead SOIC package supports compact surface-mount instrumentation.

🌐

Communications Receivers

The AD602JR can serve as a wideband gain-control stage in communications receivers when the incoming signal level changes over a broad range. Linear-in-decibel control simplifies attenuation and amplification calibration across the -10 dB to +30 dB range. Its 35 MHz -3 dB bandwidth is suitable for wideband receiver front ends, while the 1.4 nV/√Hz input-noise density limits added broadband noise during low-level reception. Dual independent channels may also support diversity receivers, phased RF measurement channels, or parallel test points within a single 16-lead package.

🖥️

Precision Test and Measurement

In precision instrumentation, the AD602JR can adjust signal amplitude before an ADC or analysis chain without changing the underlying system gain setting. The -10 dB to +30 dB range offers attenuation for preventing overload as well as amplification for low-level measurements, and the 0.3 dB absolute-gain accuracy supports repeatable test setup. A 35 MHz -3 dB bandwidth accommodates high-frequency test signals, while -60 dBc THD at a 1 V output helps maintain measurement fidelity. Two independent channels can monitor or condition two related signals simultaneously.

🧩

Wideband Sensor Signal Conditioning

The AD602JR is appropriate for sensor front ends whose output amplitude varies over a wide dynamic range. Placing gain control immediately after the sensor can reduce the burden on later stages and help maintain a consistent operating level for conversion. The low 1.4 nV/√Hz input-noise density is beneficial when the sensor output is small, and the 35 MHz -3 dB bandwidth preserves fast sensor transients. Independent control of the two channels is useful for differential, complementary, or multi-element sensing arrangements where separate calibration is required.

What is the AD602JR?
The AD602JR is a dual-channel, low-noise variable gain amplifier with independent gain control for each channel. According to the Analog Devices AD600/AD602 data sheet, Rev. F, each channel covers -10 dB to +30 dB of gain, operates up to a 35 MHz -3 dB bandwidth, and is optimized for ultrasound imaging as well as other precision wideband signal chains.
What are the key specifications of AD602JR that engineers should know?
The AD602JR combines two independently controlled channels, a -10 dB to +30 dB gain range, 35 MHz -3 dB bandwidth, 1.4 nV/√Hz input-noise density, and -60 dBc THD at a 1 V output. The Analog Devices AD600/AD602 data sheet also identifies 0.3 dB absolute-gain accuracy and linear-in-decibel gain control, making these figures the principal selection criteria for ultrasound and precision receiver designs.
What is the gain range of AD602JR?
Each AD602JR channel provides adjustable gain from -10 dB to +30 dB. According to the Analog Devices AD600/AD602 data sheet, Rev. F, the device uses two gain ranges and a linear-in-decibel control response, with the upper range extending to +30 dB. This range supports attenuation as well as amplification when receiving signals whose amplitude varies substantially.
What is the bandwidth of AD602JR?
The AD602JR has a -3 dB bandwidth of up to 35 MHz. The Analog Devices AD600/AD602 data sheet, Rev. F, describes the AD600/AD602 family as wideband variable gain amplifiers, so the 35 MHz figure is especially relevant to ultrasound imaging, communications receivers, and instrumentation requiring controlled gain beyond conventional audio-frequency amplifiers.
How noisy is the AD602JR?
The AD602JR specifies an input-noise density of 1.4 nV/√Hz. According to the Analog Devices AD600/AD602 data sheet, Rev. F, this low input noise supports high-sensitivity receiver designs where the input stage must amplify small signals without adding excessive broadband noise. The dual-channel architecture also keeps both acquisition paths in one 16-lead SOIC.
Where can I download the AD602JR datasheet PDF?
The official AD602JR data sheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD600_602.pdf. The document covers the AD600/AD602 family and provides the details needed for gain ranges, electrical characteristics, package information, and typical application use. Use the pin-description table in this manufacturer document when assigning PCB connections.
Where can I find the AD602JR pinout?
The AD602JR pinout is defined in the AD600/AD602 data sheet from Analog Devices and its 16-lead SOIC pinout drawing. Because the two channels have independent gain controls, verify every signal, supply, and control connection against the package drawing rather than relying only on a generic SOIC footprint. The linked manufacturer PDF is the authoritative source for connector assignments.
Is AD602JR suitable for ultrasound imaging?
Yes, the AD602JR is specifically optimized for ultrasound imaging systems. According to the Analog Devices AD600/AD602 data sheet, Rev. F, its dual independent channels, -10 dB to +30 dB gain range, 1.4 nV/√Hz noise density, and 35 MHz -3 dB bandwidth suit receiver channels that require gain adjustment, low distortion, and broad signal bandwidth.
What is the difference between AD602JR and AD602ARZ?
The AD602JR and AD602ARZ are ordering variants in the same Analog Devices AD602 family and use the 16-lead SOIC footprint. The manufacturer data sheet identifies the same functional gain range and performance family, while the ordering suffix can distinguish commercial, temperature, qualification, and tape-and-reel options. Confirm the exact temperature grade and shipment form against the current product table before substitution.
When should I choose AD602JR over another AD602 variant?
Choose AD602JR when the design specifically requires the original commercial-grade 16-lead SOIC ordering configuration and does not need a different temperature grade, qualification level, or reel format. The Analog Devices AD600/AD602 data sheet confirms the underlying device performance, but the exact suffix selection should follow the required ambient-temperature range, production packaging method, and certification obligations.
What can replace AD602JR?
The closest same-family replacements are AD602ARZ and compatible AD602 16-lead SOIC ordering variants, provided their temperature grade, gain-control implementation, and electrical limits match the system requirements. According to the Analog Devices AD600/AD602 family documentation, AD602ARZ uses the same 16-lead SOIC format. A cross-manufacturer VGA should not be treated as drop-in without verifying pinout, control polarity, bandwidth, noise, and supply requirements.
Is AD602JR the same as AD602JN?
No. AD602JR is supplied in a 16-lead SOIC, while AD602JN is supplied in a 16-lead DIP. Although both belong to the AD602 family and share the core dual-variable-gain-amplifier function, their physical packages and PCB land patterns differ, so AD602JN is not a pin-compatible drop-in replacement for an existing AD602JR footprint.
What is the best drop-in replacement for AD602JR?
AD602ARZ is the principal same-footprint candidate identified for replacement consideration because it is an AD602-family device in a 16-lead SOIC. Before using it as a direct substitute, verify the required temperature grade, supply voltage, gain-control range, and shipment format. The Analog Devices AD600/AD602 data sheet remains the basis for functional and pin-level validation.
Where can I buy AD602JR online?
AD602JR can be requested through the Request a Quote form on this product page. The form is the appropriate route for current commercial availability, order quantity, shipment format, and lead time because distribution and inventory can change. The official Analog Devices AD602 product page is also available for lifecycle, documentation, and product-selection information.
How much does AD602JR cost?
Use the Request a Quote form on this page for the current AD602JR commercial quotation. Pricing depends on order quantity, package shipment format, and current component availability, so a static price would age quickly. The manufacturer's AD602 product page and the AD600/AD602 data sheet provide the authoritative product and documentation references for an engineering review.
What is the lead time and stock status for AD602JR?
Request the current stock position, lead time, and minimum order quantity through the Request a Quote form on this page. The Analog Devices product page identifies the AD602 as an active product family, but orderable quantity and delivery timing can vary by exact suffix and shipment format. Confirm the AD602JR configuration in the quotation response before releasing a production order.
What design constraints matter when using AD602JR?
The principal constraints are supply headroom, gain-control bandwidth, thermal dissipation, and careful implementation of the 16-lead SOIC footprint. According to the Analog Devices AD600/AD602 data sheet, Rev. F, the device provides -10 dB to +30 dB gain, 35 MHz -3 dB bandwidth, and 1.4 nV/√Hz input noise. Use the manufacturer bypass and layout recommendations, and preserve signal integrity on both independent channels.

엔지니어링 참조 데이터: AD602JR — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose AD602JR when the design requires the specified commercial 16-lead SOIC configuration and a dual, independently controlled VGA with -10 dB to +30 dB gain, 35 MHz -3 dB bandwidth, and 1.4 nV/√Hz input noise. AD602ARZ is the practical same-family candidate to examine when production purchasing requires a different ordering suffix, subject to confirming temperature grade and shipment configuration. AD602JRZ and AD602AZ provide additional same-family configuration choices with the same stated core gain performance. Use AD602ARZ-R7 or AD602JRZ-R7 for reel-based production handling. Avoid AD602JN as a drop-in alternative because its DIP package does not match the SOIC land pattern. For any candidate, verify the manufacturer pin assignment, supply requirements, gain-control polarity, operating temperature, and channel-to-channel performance before approving a substitution.

대체품과의 비교

파라미터 이 제품 AD602ARZ AD602JRZ AD602AZ AD602ARZ-R7 AD602JRZ-R7
Package 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC 16-lead SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Number of Channels 2 independent channels 2 independent channels 2 independent channels 2 independent channels 2 independent channels 2 independent channels
Gain Range -10 dB to +30 dB -10 dB to +30 dB -10 dB to +30 dB -10 dB to +30 dB -10 dB to +30 dB -10 dB to +30 dB
Gain-Control Response Linear in dB Linear in dB Linear in dB Linear in dB Linear in dB Linear in dB
Absolute Gain Accuracy 0.3 dB 0.3 dB 0.3 dB 0.3 dB 0.3 dB 0.3 dB
Input Noise Density 1.4 nV/√Hz 1.4 nV/√Hz 1.4 nV/√Hz 1.4 nV/√Hz 1.4 nV/√Hz 1.4 nV/√Hz
-3 dB Bandwidth 35 MHz 35 MHz 35 MHz 35 MHz 35 MHz 35 MHz
Total Harmonic Distortion -60 dBc THD at 1 V output -60 dBc THD at 1 V output -60 dBc THD at 1 V output -60 dBc THD at 1 V output -60 dBc THD at 1 V output -60 dBc THD at 1 V output

주요 차별점

  • Two independently controlled receive channels (vs AD602ARZ)
  • Wideband gain control (vs AD602JRZ)
  • Low-noise precision gain control (vs AD602AZ)

설계 노트

Follow the AD600/AD602 manufacturer's pin and layout guidance when assigning the 16-lead SOIC footprint. Place input, output, supply-bypass, and gain-control connections so that high-impedance control nodes remain away from fast output paths. Keep analog signal traces short and return them to a continuous ground plane, while separating the two channels where independent gain settings could otherwise couple through shared supply impedance.

Use the supply limits and bypass recommendations in the AD600/AD602 data sheet, Rev. F, and place decoupling capacitors close to the device's supply pins. Adequate bypass is particularly important because two independent channels can create changing current demand during gain adjustment. Provide the required voltage headroom for the selected output level and operating frequency, and verify that supply ripple and ground bounce do not degrade gain accuracy or distortion.

The AD602JR provides a 35 MHz -3 dB bandwidth, so board parasitics, connector transitions, and control-line coupling become more important as operating frequency rises. Route gain-control signals away from input and output traces, terminate unused or unused-range nodes according to the manufacturer's circuit examples, and preserve a continuous return path. Validate the complete two-channel layout with time-domain measurements if echo-waveform fidelity is critical.

Do not treat every AD602 ordering suffix as electrically interchangeable without checking temperature grade, qualification, and shipment format. AD602JN is not a drop-in option because it uses a DIP rather than the AD602JR's 16-lead SOIC. Likewise, do not substitute a generic VGA solely by package count; verify gain-control polarity, gain range, bandwidth, noise, distortion, supply requirements, and the exact manufacturer pin assignment before releasing a replacement to production.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

No explicit compliance declarations for the exact AD602JR ordering configuration were identified. AEC-Q100 is treated as not applicable because the device is an analog amplifier IC rather than an automotive-qualified component.

데이터 검증일: 2026-11-14 — XAIPART 부품 엔지니어링 팀이 검증하고 관리한 데이터

관련 검색

AD602JR datasheet AD602JR datasheet pdf AD602JR pinout AD602JR equivalent AD602JR replacement AD602JR cross reference AD602JR price AD602JR stock Analog Devices AD602JR AD602JR 35MHz VGA AD602JR 16-SOIC pinout AD602JR ultrasound amplifier AD602JR vs AD602ARZ AD602JR application circuit AD602JR dual variable gain amplifier

관련 부품 & 용어

Analog Devices AD602JR AD602ARZ AD602JRZ AD602AZ AD602ARZ-R7 AD602JRZ-R7 variable gain amplifier VGA dual-channel amplifier analog amplifier IC signal-chain IC semiconductor linear-in-decibel gain control input-noise density absolute-gain accuracy total harmonic distortion gain range bandwidth ultrasound imaging diagnostic medical imaging industrial ultrasound communications receiver test and measurement 16-lead SOIC SOIC family surface mount SMD
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기