AD604ANZ - Dual Ultralow Noise Variable Gain Amp | ADI
Référence : AD604ANZ ✓ ActifAD604ANZ Présentation
A variable gain amplifier is an amplifier whose gain changes under electronic control while preserving the useful relationship between signal amplitude and the control voltage. Variable gain amplifiers sit within the broader signal-chain hierarchy of sensor interfaces, instrumentation amplifiers, analog signal processing, and specialized amplifier ICs. The AD604 family is specifically positioned for low-noise measurement systems that require accurate, continuously adjustable gain.
The AD604ANZ combines an ultralow-noise dual amplifier with linear-in-dB gain adjustment. This makes it appropriate for systems in which gain must vary over a wide operating range without relying on a large number of switched gain paths. The device is also suitable for any application requiring low noise and wide bandwidth, extending its use beyond ultrasound into precision instrumentation and measurement equipment.
Each channel is controlled independently, allowing the two sections to handle related or separate signals. When paired with suitable front-end circuitry, the low-noise architecture can help preserve small-signal information before downstream filtering, digitization, demodulation, or measurement. Exact gain range, gain-control slope, bandwidth, noise density, dynamic range, supply limits, and accuracy values should be confirmed in the manufacturer datasheet before a circuit is finalized.
Typical uses include ultrasound receiver and imaging channels, medical diagnostic instrumentation, laboratory measurement systems, and other low-noise analog front ends. In an ultrasound design, the AD604ANZ can compensate for the large attenuation associated with tissue depth, allowing downstream circuitry to receive a signal whose level remains useful across a broad operating range.
Circuit design should account for the manufacturer's recommended bypass capacitors, gain-control interface, output loading, and printed-circuit-board layout. Keep high-gain analog traces short, maintain a quiet ground return, and place decoupling components close to the supply pins. The through-hole 24-PDIP format is mechanically straightforward but requires more board area than a surface-mount alternative.
This product page combines the AD604ANZ's official device identity with package, lifecycle, application, replacement, and design-placement guidance. It also distinguishes documented production variants from parts that require a different footprint, helping engineers identify whether a proposed substitution is genuinely pin-compatible before committing to a PCB or production BOM.
Alternatives de remplacement direct pour AD604ANZ — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec AD604ANZ (même facteur de forme et même empreinte) — différant par Mounting Type, Product Type.
AD604AN
✅ Remplacement directContactez-nous pour le prix
Voir la fiche technique →AD604ANZ Valeurs maximales et caractéristiques électriques
| Product Type | Dual variable gain amplifier |
| Number of Channels | 2 channels |
| Gain Control Characteristic | Linear in dB |
| Noise Performance | Ultralow noise |
| Primary Optimization | Time-based variable gain control for ultrasound |
| Boîtier | 24-PDIP |
| Number of Terminals | 24 terminals |
| Type de montage | Through-hole |
| Temperature Grade | Industrial |
| Production Status | Production |
Guide de configuration des broches du AD604ANZ 24-pdip
Configuration des broches du AD604ANZ (boîtier 24-pdip). Ce composant analogique comporte des broches d'entrée, de sortie et d'alimentation. Consultez la fiche technique du fabricant pour les configurations des broches d'annulation d'offset, de compensation et d'activation. Idéal pour le conditionnement de signaux et les circuits amplificateurs.
Aucune donnée de brochage détaillée disponible pour AD604ANZ.
Consultez la fiche technique pour la configuration complète des broches.
Applications typiques
AD604ANZ convient pour 6 applications: Ultrasound Receiver Signal Conditioning, Medical Diagnostic Instrumentation, Precision Measurement Front End, Low-Noise Signal Conditioning, Laboratory Signal Analysis, Wide-Bandwidth Analog Processing.
Ultrasound Receiver Signal Conditioning
The AD604ANZ fits ultrasound receiver channels that require low-noise gain adjustment as received echoes change with tissue depth. Its two channels can process related receiver signals, while linear-in-dB control provides a convenient relationship between the gain-control input and signal attenuation compensation. The ultralow-noise architecture is valuable when weak echoes must remain observable before conversion or further processing. Exact suitability depends on the receiver bandwidth, required gain range, and noise-density target; use the manufacturer electrical tables to confirm that the AD604ANZ meets all three limits.
Recommandé
Medical Diagnostic Instrumentation
AD604ANZ is appropriate for medical diagnostic front ends that must adjust gain without introducing excessive circuit noise. Two independently controlled amplifier channels can support paired sensing paths or related differential measurements. Its dual 24-PDIP implementation also makes it convenient for instrumentation prototypes where circuit accessibility and individual signal-path troubleshooting are important. Because the retrieved product information identifies an industrial temperature grade rather than an explicit medical qualification, the final system must evaluate operating temperature, quality requirements, risk controls, and applicable regulatory processes separately.
Recommandé
Precision Measurement Front End
The AD604ANZ can serve as the variable-gain stage in a precision measurement chain where the input amplitude changes across a broad operating range. Ultralow-noise operation helps retain small-signal information, while dual-channel construction allows related measurements to use a consistent gain-control architecture. The 24-PDIP package is particularly useful for laboratory instruments, automated test equipment, and proof-of-concept systems that benefit from socketed or through-hole assembly. Before implementation, confirm that the specified gain-control range and bandwidth cover the measurement bandwidth without relying on an undocumented assumption.
Recommandé
Low-Noise Signal Conditioning
AD604ANZ is well suited to generic low-noise signal-conditioning tasks that need electronically adjustable gain in a dual-channel device. The linear-in-dB characteristic supports systems where a consistent gain-control slope is more useful than a linear-volt-per-volt relationship, while ultralow-noise behavior helps minimize the amplifier's contribution to the measurement floor. Two channels can condition separate sensors or provide matched channels for comparison. Gain accuracy, input headroom, output swing, and supply requirements must be checked against the exact signal range using the Analog Devices datasheet.
Recommandé
Laboratory Signal Analysis
The AD604ANZ can be incorporated into laboratory signal-analysis equipment where gain must adapt to changing input levels and low noise is important during acquisition. Its dual-channel architecture provides two variable-gain paths within one package, reducing the number of separate VGA packages required for a paired instrument. The 24-PDIP format simplifies prototyping and replacement in educational, research, and industrial laboratory hardware. Validate the usable bandwidth, gain-control interface, output swing, and power requirements against the intended source impedance before building the final analog board.
Recommandé
Wide-Bandwidth Analog Processing
AD604ANZ supports wide-bandwidth analog-processing systems requiring adjustable amplification rather than a fixed-gain operational amplifier. The manufacturer identifies the device for both ultrasound and general applications that need low noise and wide bandwidth, while its dual-channel construction enables paired processing paths. A useful implementation places the amplifier where changing signal amplitude requires controlled gain adjustment before filtering or conversion. The actual signal bandwidth, slew behavior, output drive, and stability must be confirmed from the datasheet, and the PCB should minimize feedback-loop length and maintain clean supply decoupling.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour AD604ANZ — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | AD604AN |
|---|---|---|
| Package | 24-PDIP | 24-PDIP |
| Brand | Analog Devices | Analog Devices |
| Number of Channels | 2 channels | 2 channels |
| Amplifier Type | Variable gain amplifier | Variable gain amplifier |
| Gain Control | Linear in dB | Linear in dB |
| Noise Class | Ultralow noise | Ultralow noise |
| Primary Application | Ultrasound and low-noise gain control | Ultrasound and low-noise gain control |
| Mounting Type | Through-hole | Through-hole |
Principaux différenciateurs
- Dual-channel gain control in one package (vs AD604AN)
- Ultralow-noise variable gain operation (vs AD604AN)
- Linear-in-dB gain-control characteristic (vs AD604AN)
Notes de conception
Place the manufacturer-recommended supply-decoupling capacitors directly between each supply pin and the appropriate ground reference, with the shortest possible traces. Keep the gain-control input and output routing compact, and route each high-gain channel away from the unused channel and digital control circuitry. Because the AD604ANZ is a low-noise gain device, ground-current paths and supply-impedance differences can affect measured noise and channel performance.
Use the 24-PDIP footprint and pin assignments defined by the Analog Devices AD604 datasheet without assigning functions from a 24-SOIC variant. Keep analog input and output nets away from clocks, switching supplies, and high-current return paths. For dual-channel layouts, use symmetrical component placement and routing where channel matching matters, and keep the gain-control interface physically separated from sensitive high-impedance nodes.
Do not treat AD604AN, AD604AR, and AD604AR-REEL as interchangeable footprints. AD604AN is the supported same-package family alternative, while the retrieved AD604AR options are described as SOIC-24 parts. Also verify the exact gain-control range and signal bandwidth before assuming the amplifier can cover a transducer, sensor, or test source. Unverified assumptions about gain, noise, and supply limits can create instability or inadequate dynamic range.
Use the manufacturer gain-control interface exactly as specified and provide a stable reference to each control input. Where multiple channels must track closely, evaluate gain-control mismatch and propagation behavior across the intended signal bandwidth. Avoid adding long test leads or high-impedance probes directly to sensitive nodes, because distributed capacitance can alter control response and couple noise into the amplified signal path.
Informations de conformité
The AD604 family is identified as production and AD604ANZ as industrial temperature grade, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration was identified. Industrial temperature grade does not establish AEC-Q100 qualification.